Skip to Content

Check Forward Safety System in Hyundai

Check Forward Safety System in Hyundai

Hyundai vehicles are equipped with a lot of safety features to ensure security on the road and make their cars reliable. They have a forward safety system that uses a set of radars, cameras, and sensors to access vehicles, pedestrians, and road hurdles.

Check Forward Safety System message in Hyundai cars can be due to poorly calibrated radar, malfunctioning brake system, electric problems, dirty windshield cameras, poorly aligned radar and sensors, moisture ingression, faulty cruise control, obstructive sensors and cameras, weather conditions, limitations of cameras and recall issues.

I also saw this message while driving my Honda Odyssey under the tunnel. I became anxious, but the message disappeared as I crossed the tunnels. The issue happened because dark conditions do not allow the cameras and radars to detect the road conditions.

Causes Solutions
Poorly calibrated radar Re-calibrate newly installed radars
Malfunctioning brake system Check the brake fluid level
Electric problems Check and re-route electric wires
Dirty windshield camera Clean windshield camera
Poorly aligned radar and sensors Re-install poorly aligned radars and sensors
Moisture ingression in radars and sensors Use silica gel to absorb moisture
Faulty cruise control Replace blown-out fuse
Obstructive sensors or cameras Carefully add tint or sticker on the windshield
Weather conditions Avoid driving in extreme weather conditions
Recall issue Check the NHTSA recall list

Poorly calibrated radar

Hyundai’s safety system uses sensors and cameras to detect objects that are approaching your vehicle. These sensors and radars give the information to the control unit, giving the drivers an audio warning.

In addition, it also causes the steering wheel to vibrate to alert you so you can apply brakes and turn the steering wheel accordingly. However, it automatically applies brakes to stop your car in severe conditions.

Sometimes, radar becomes faulty because of the exposure to environmental elements.

Moreover, these can break during accidental collisions. You have to calibrate the newly installed radars to make them compatible with the computerized system and control unit for accurate sensing and response.

Malfunctioning brake system

Hyundai’s safety system also efficiently controls your car’s brakes to decrease the risk of forward collision. It automatically engages the brakes after detecting the pedestrian, vehicle, or road hurdles in your surroundings.

You can see a warning message because of the malfunctioning of the braking system. The system shuts down when braking components become bad because it cannot engage the brakes to ensure safety.

Brake system faults include bent rotors, dirty or contaminated parts, and low brake fluid. You should keep the braking components clean and check the brake fluid level to maintain its braking efficiency.

Electric problems

Sensors, cameras, or radars that are used to detect the presence of objects near your Hyundai cars are connected to the control modules via electric wiring.

The forward safety system stops functioning when cameras and sensors cannot communicate with the ECM because of broken and detached electric wires.

The issue also comes because of the broken connectors and loose connections. Moreover, electric wires can also break because of their age, rodents chewing, overheating, and short circuits.

Check the electric wiring of the instrumental cluster panel routed to the specific sensors and replace the broken wires with new ones. Use the electric wires of the same voltage to reduce the overheating and melting of the insulation coating chances.

Dirty windshield camera

This safety system uses the cameras mounted over the windshield. It stops functioning because of the dirty or faulty windshield-mounted cameras.

These cameras cannot recognize objects or vehicles because of the broken lens. In addition, the issue also comes when cameras get out of alignment.

The lens can also get dirty because of the frequent spraying of washer fluid through windshield wipers. You have to clean the camera lenses with a soft cleaner.

Avoid using a damp cloth because it leaves marks on the lens surface, leading to poor detection. It is better to use a glass cleaner to clean its lens.

Poorly aligned radar and sensors

Radars, cameras, and sensors are aligned on the front side of the vehicle. These are located on the front bumper and windshield, depending on the several Hyundai models.

Poorly aligned sensors and cameras can cause issues in the safety system, and you have to reset it before driving.

Alignment issues come when you replace the broken sensors or radars with new ones and do not install the new ones correctly. These can also get out of alignment because of road accidents and high-impact front collisions.

You have to re-install the radars and sensors to align them properly so they can detect their surroundings correctly.

Accumulation of moisture in radars and sensors

The radar and sensors are the electric components that send signals to the computer system via electric wires. They become faulty because of water ingress in radars and sensors.

Water can affect the electric connections and make them faulty. In addition, it also increases the risk of rusting electric connectors, and they cannot give the signal to the computer system.

Moisture accumulation can be due to inaccurate deep car washing techniques. In addition, driving and parking outside on a rainy day cause water to get inside several components and make them faulty.

Spread the silica gel near these parts to absorb the excessive moisture, and you can clean these components.

Faulty cruise control

The forward safety system in Hyundai works with cruise control, which maintains the speed of the vehicle. My friend also experienced the problem while driving on the highway.

He set the speed of his car at 55 mph so he could also use driver-assist safety features to reduce driving fatigue. Suddenly, a forward safety message came on the screen. He checked the speedometer, which was moving at more than 65mph.

He realized that inaccurate speed changes come from faulty cruise control, which could not maintain the constant or pre-set speed range. It was not functioning because of the blown-out fuse, so he replaced it with a new one.

Obstructive sensors or cameras

The foreign material also obstructs cameras mounted on the front windshield. The issue comes when you drive in rainy and snowy weather. Snow and rainwater come on the lens of the cameras and lead to poor detection and check-forward safety warning messages.

In addition, the problem also comes when you tint the front windshield or add a sticker on it to block the direct UV exposure. Furthermore, sticky foreign substances such as bugs and insects also cause obstruction.

Sun glare and brightness can also obstruct the camera’s view and cannot detect the vehicles. Cameras cannot detect the road conditions because of low and bright light conditions.

You should avoid placing larger objects on the dashboard because it can also cause hindrance. Carefully apply tint or sticker on the windshield so it cannot obstruct the view.

Weather conditions

Radars and sensors on the front side of the cars are temperature-sensitive. They cannot function when the outside temperature is excessively high or low.

These cannot function in hot and cold weather, and you can see the error in the cluster screen of your car.

It is better to avoid driving in extreme weather conditions because of the risk of failure of different components.

Recall issue

The issue came because of the software glitches or poor installation of front radars.

The manufacturers recalled their affected vehicles and provided the free-of-cost system update and radar replacement. If your car shows a “Check Forward Safety System message”, you get it fixed for free.

You have to check the official website of NHTSA to see if your vehicle’s VIN is mentioned in the list. However, you have to check the other components if your car is not on the list of recalled vehicles because you are not facing issues because of system updates or poorly installed radars.

Related Articles:

Is the Camaro car reliable after 100k miles?

Kia Check AEB System Alert