Skip to Content

How Deep is a Truck Bed?

How Deep is a Truck Bed?

The depth of truck beds depends on their type, model, and cab design. However, deep beds provide safe transportation of loaded material to distant locations. 

How Deep is a Truck Bed? A truck bed is 20 to 22.4 inches deep; Ford F150 has 21.4 inches deep cargo, F250 has 20 inches bed, F350 has 21.1 inches, and Chevrolet Silverado 1500 has 22.4 inches. The RAM 1500 bed is 21.4 inches deep, RAM 2500 is 20.2 inches, Tacoma is 19.1 inches, the Toyota Tundra bed is 20.9 inches, and GMC Sierra is 22.40 inches deep. 

You can check the depth of your truck bed on the manual in a separate section of dimensions, or you can use a measuring tape or digital meter. 

How deep are the truck beds of different pickup trucks?

The depth of the truck beds is the length from their floor to the top of the walls. However, the average depth of different pickup truck beds is around 20 to 22.4 inches.

It slightly changes according to the design of pickup trucks, their models, and manufacturing properties.

The dimensions, weight, cab design, and type of usage determine it. Several variants are around 21 to 21.4 inches deep. 

For Ford trucks, the deepness is necessary to carry the material in the cargo compartment. In these conditions, the Ford F150 has a deep bed of around 21.4 inches. 

However, the Ford F250 and its different cabs have less deep cargo, with an average of nearly 20 inches. In addition, the carriage capacity is more than Ford F150 due to more width and length.

Similarly, the cargo compartment is around 1.3 to 1.4 inches smaller than the F150. The heavy-duty Ford F350 has deeper cargo with an average dimension of 21.1 inches.

For carrying excessive loads, these heavy-duty variants have shallow heights. According to our research and calculation, Chevrolet Silverado 1500 HD has the deepest bed with dimensions of around 22.4 inches to adjust more storage material. 

Its standard and short variants have elaborated cargos. Moreover, all the models of Chevrolet Silverado have beds with a depth of 22 inches. 

Furthermore, RAM 1500 has options for long and short-load carriers for diverse functions. Both versions have cargo with an average depth of 21.4 inches. 

Their payload limits vary according to the adjustment of things and built-in curves inside the cargo unit. For example, RAM 2500 has a slightly less deep box with dimensions of 20.2 inches.

They provide a cargo volume of nearly 74.7 cubic feet to accommodate massive loads. Furthermore, Toyota Tacoma has different bed options with non-identical dimensions.

They have an average depth of around 19 to 19.1 inches. However, different variants of the Toyota Tundra have 20.9 inches- deep cargo.

Its double-cab versions are available with distinctive weight-loading capacities. But, it has identical depth limitations to the standard variants. 

GMC Sierra has a truck bed depth of about 22.40 inches and facilitates a capacity of 71.70 cubic feet. Also, you can utilize them to carry boxes, stacked loads, and food items. 

Examples of pickup trucks and the depth of their truck beds

Names of pickup trucks Depth of truck bed (In inches)
Ford F150 21.4
Ford F250 20
Ford F350 21.1
Chevrolet Silverado 1500 22.4
RAM 1500 21.4
RAM 2500 20.2
Toyota Tacoma 19.1
Toyota Tundra 20.9
GMC Sierra 22.40

How to measure the depth of a truck bed?

It is essential to find the actual depth of your truck bed to determine its hauling capacity. Moreover, it indicates the type of carriage material. 

Sometimes, the longer cargos have shallow volumes. However, their width and length cannot indicate their depth. 

To assess the actual values, you can measure them with or without assistance. For this purpose, remove the stored matter from the cargo unit.

Open the tailgate and enter the compartment. Also, use a measuring tape to evaluate the correct values. 

Take the help of a friend to hold one corner of the measuring tape and remove calculation errors. Then, sit on the floor of the truckload carrier and adjust one end on the bottom. 

Then, fix the other on the top section of the side wall and record the value on paper. During the measurement, keep the tape parallel to the walls and stabilize it in a straight position. 

In these procedures, the distance from the cargo floor to the upper edge of the side wall is the depth. 

What are the benefits of a deep truck bed?

They are better for maximum accommodation of heavy and lightweight material. For safety, these units are better than those with short depths.

Storage of boxes without straps

Due to deep and spacious cargo, you can get more volume to accommodate different heavyweight and lightboxes. However, the adjustment is less challenging without external support.

In these stored procedures, you can adjust the boxes along the side walls and near the separation of the bed from the cabin compartment. These boxes do not require straps or ropes to tie them with the walls of side edges due to deep boxes. 

They fix inside their adjustment spots, and road bumps have no impact on their position. Without straps, you can transfer fragile and heavy items to long-distance areas. 

The non-shallow boxes store the storage material with their holding capacities. It reduces transportation costs and increases the overall safety of the loaded matter. 

Stacking of storage material

Unlike flat cargo, you can stack storage boxes, bags, and packets on the deep floors of rear storage units.

In addition, due to their deep designs, they allow less complicated stacking of different materials according to their fragility. 

You can stack the boxes to leave more free space. It improves the overall hauling capacity of these units. 

You can make rows of stacked things with or without support. However, stacking alongside the walls is one of the safest methods. 

With these procedures, you can stabilize heavy loads in one particular space. In addition, stacking of storage material in the deep cargo improves the visibility of material for the driver, which increases its protection level. 

More carriage capacity

Several people use truck beds to transport household furniture, food, and heavy loads. In these conditions, they prefer deep cargos for a single transfer activity.

It can reduce the total cost and stabilize the budget of a truck owner. In addition, with improved depth, these pickups have more hauling capacities.

Moreover, they can carry, haul and transport heavy loads without swaying surface damage. For shifting procedures,

Chevrolet Silverado storage compartments are one of the best options with more storage volume. However, they have stable and flat floors that resist the rolling of stored things.

Related Articles:

Cruise Control in Semi Trucks

What is a Tandem Truck?