The front discs and rear drum brakes on Honda Civic are expensive, and you have to replace them due to internal damages, excessive usage, and heat dissipation. With a complicated design, the disc replacement takes 3 to 5 hours.
How much does it cost to replace Brakes on a Honda Civic? The average cost to replace the brakes on a Honda Civic is around $195 to $216. Its drum brakes cost between $235 to $265 per axle. Replace the discs for $310 to $780 per axle, while the labor charges are $270 to $550 for discs and $175 to $190 for drums swap.
With DIY methods, you can save around $70 to $120. However, the procedure takes more time due to inappropriate handling skills.
How much does a pair of brakes cost for a Honda Civic?
The average cost of these components is around $120 to $210 per axle. The price of a rear drum is about $20 to $23, and you can purchase a pair for around $40 to $46. It has a variable price range due to packaging, the number of drums, and shoes.
Purchase a pair of discs in around. $27 to $45, and its price varies according to the manufacturing companies and the quality of the material. With tightening nuts and bolts, get one disc for around $14 to $23.
You can purchase a replacement kit from online portals and auto part shops. These kits have a pair of equipment for the front or rear axle with nuts, bolts, and clamps.
What is the average cost to replace brakes on a Honda Civic?
The average cost to change the brakes is about $195 to $216.
All Honda variants have an anti-lock brake system that provides excessive control to the driver. The front and rear axle have drums and discs according to manufacturing specifications.
The average cost to change the drums is about $235 to $265. You can change them on one wheel for about $118 to $133. Alter it on 1995 to 1997 models for about $145 to $150 per axle.
On these variants, you can swap them for around $73 to $75 on each wheel. Change it from $135 to $140 on all the 1998 to 2001 variants.
Replace the drums on 2002 to $2006 variants for about $270 to $360 on both rear wheels. Change the drums from around $235 to $263 on all the modern vehicles,
You can replace the worn-out and broken discs for about $310 to $780. The average cost is $268 to $270 due to design complexity.
The price is high because the discs are complex structures with challenging replacement procedures. However, you can change one disc on an individual wheel for about $80 to $82.
Change the disc on one axle for around $160 to $165. The procedure cost increases according to the axle type and its working condition.
With complications, the average cost per axle is about $470 to $480. Replace it on the 1995 to 1999 variants for about $256 to $330.
For the variants of 2001 to 2003, the average replacement cost is $236 to $326. Replace it with around $249 to $325 on the 2004 to 2006 models.
From 2007 to 2010, the procedure expense is about $240 to $320. On all the latest models from 2011 to 2022, change the discs from around $310 to $420 per axle.
What is the labor cost to replace the brakes on a Honda Civic?
The labor and professional machine cost according to per hour patterns. The average cost to swap the complicated discs per axle is around $90 to $110.
However, the procedure is complex and consumes around 3 to 5 hours. With such conditions, the labor charges around $270 to $550 for the alteration.
However, you can change the pads within 1 to 3 hours, but the overall replacement consumes multiple hours.
The labor has all the essential equipment to carry out non-problematic activities.
They purchase high-quality components and add the prices to the total amount. For drums, the labor charges around $60 to $75 for each axle.
The price is low due to their non-complicated installation and removal. The procedure consumes 1 to 3 hours, and the labor cost varies according to variable policies and the type of dealership.
In these procedures, the price of parts is around $175 to $190.
What is the DIY method to replace the brakes on a Honda Civic?
The DIY method is less expensive and costs around $145 to $250 per axle. You can change the components for around $73 to $125 per wheel. However, the expense varies according to the type of brake system.
Drum replacement
Stabilize the car in your garage and pull the emergency brake. Then, shift the system to Park mode with an automatic gear system.
Remove the lug nuts of the rear wheels with a socket and wrench. Next, loosen the tires and leave them inside the frame. Then, uplift the frame with a high-quality jack.
Then, lift the frame, access the rear tires, hold the lug nuts, and remove the wheels. Next, access the wheel hub, install two 8mm bolts, turn them simultaneously, and remove the old drums.
Clean the surface, hold the springs, pull those outwards, and remove them from the pads.
Disconnect the parking cable from the pads. Remove the front shoe and detach the U-shaped clips. Remove the shoe with a plier and keep it aside.
Drill the debris, open the mounting holes and protect the pin. Then, adjust the new equipment in the wheel hub, reassemble the drums, tighten the supports nuts and reinstall the removed wheels.
Disc replacement
Access the master cylinder on the driver’s side and remove its protective covering. Before replacement, drain and collect the brake fluid from the master cylinder.
Behind the front wheels, adjust the jack and lift the frame. Next, fix the lug wrench on the nuts, loosen them and remove the tires.
Access the dual bolts behind the caliper, adjust a metric socket on them and remove the bolts. Then, pull out the caliper and fix it over the rotor.
Detach the pads and assess their positioning to adjust the new equipment. Then, clean the surface, add the components and retract the caliper.
Remove the C-clamp after adjusting the piston. Next, replace the rotors, calipers, and brake pads, and tighten the lug nuts and screws. Finally, readjust the removed wheels and fix them in their standard positions.
Why would you replace the brakes on a Honda Civic?
Broken and worn-out equipment affects the performance of the engine and other components. Several people replace them due to the following problems.
Insufficient force to stop
They lack the sufficient force to stop the vehicle due to internal damages and cracking of pads. As a result, the emergency brake fails, and you cannot stop the car before a particular spot.
Due to damages, it loses the frictional force to slow down the wheels. In such circumstances, the broken pads do not support the stopping mechanism.
Unstable control
It is challenging to control the steering wheel due to a malfunctioning system. In these conditions, the vehicle idles at high-speed.
Abnormal swaying, loss of power, and insufficient control over the steering system require the replacement of these components.
Damage to the tires
The malfunctioning system cannot distribute the vehicle weight on individual wheels.
The tires receive insufficient stop signals from the automatic or manual system. As a result, they undergo high-pressure conditions due to excessive load.
They lose their work efficiency due to internal wearing and cracking of rims.
Worn out rotors and calipers
The rotors absorb the heat during braking conditions. Therefore, excessive heat dissipation affects the performance of these small components.
Wearing and glazing reduce their lifespan, and they require a swap. In addition, the broken, clogged, and malfunctioning calipers affect the performance of ABS.
In such conditions, the alteration is essential because it can lead to transmission failure.
Accident and bumping
A failed system does not support the tires, vehicle frame, and steering system. As a result, the uncontrollable conditions cause accidents and sudden bumping in the surrounding vehicles.
Due to brake failure, fatal accidents and frame damages are frequent.
Can you drive a Honda Civic with broken brakes?
You cannot drive it with a broken and malfunctioning system because it affects the surrounding vehicles and walkers.
The car can bump into the road obstacle due to insufficient tire control.
You cannot shift the gears due to insufficient fluid pressure with failed equipment. 2001, 2003, and 2005 variants undergo frequent brake failure.
For these models, learn the appropriate expertise and knowledge to shift the gears. During such conditions, remove the foot from the accelerator and slow down the vehicle immediately.
You cannot leave one failed brake while the other three are working.
When should you replace the brakes on your Honda Civic?
They have an average lifespan of about 31000 miles to 71000 miles with appropriate cleaning and maintenance.
However, their shelf life reduces due to excessive usage, wearing of pads, rotors cracking, and malfunctioning of the calipers.
The usage increases on heavy traffic roads and leads to internal damage. The manuals of all the latest versions indicate the replacement time of these components.
However, the discs can last for about 41000 miles to 51000 miles. The drums have a longer lifespan due to reduced pressure and minimum use.
However, they require replacement after 151000 miles to 220000 miles. With appropriate maintenance, they can last the life of a car.
Related Articles: