Skip to Content

How to Turn Off Reverse Beep on Kia Sorento?

How to Turn Off Reverse Beep on Kia Sorento?

The reverse beep annoys the drivers and owners of Kia Sorento. With the latest models, people control, regulate, and use it according to convenience.

You can turn off the reverse beep on Kia Sorento by removing the positive and negative terminals of the battery, detaching the front side bumper by removing the clips, unbolting the screws, holding and releasing the latch, and popping it out. Open the hood, access the speaker wires in the harness, unplug orange and black cords from the negative terminal, and remove the green and yellow wires from the positive connector. Hide their open ends with insulated plastic clips, and reinstall the removed parts. For the latest variants, you can disable the reverse beep by manually clicking the button on the top right side of the center console.

It is a safety feature but affects the hearing ability of people with sensitive ears. The intensity of sound depends on the acceleration level of the vehicle.

What does reverse beep mean on Kia Sorento?

It is an electrically empowered backup device that beeps and warns the passing people about the reverse movement of the vehicle. It connects with the reverse signal through electric wires.

The driver engages the vehicle in reverse mode, rotates the diaphragm, and produces a loud noise.

The system produces the sound continuously until the warning lights turn off.

The built-in sensors identify the movement of the SUV. In addition, they produce a loud noise with an average frequency of about 710 Hz to 2900 Hz.

After it, the sound slows down, and you hear the basic beeping. Several variants produce it around 98 to 113 decibels. The frequency varies from 1002 Hz to 1004 Hz.

What is the method to turn off the reverse beep on Kia Sorento?

People remove it from their sound system because it annoys the surrounding people. However, you can shut it off by the following guidelines.

 Switch off the power system

Stop the SUV, park it in the garage or a less populated spot and stabilize the wheels. Access the front side of the automobile, open the hood compartment and hold it with the latch.

Approach the negative terminal for the battery, hold the connector with a wrench, loosen it, and unplug the cord. Repeat the similar activity for the positive connector of the battery system.

Leave the system for about 4 to 7 minutes and allow it to cool down. Check the electric appliances and cut the electric supply of the gadgets.

Remove the front side bumper

The SUV has a protection bar on the front side that secures the frame from road bumps. Its removal is essential to access the noisy equipment inside the hood compartment.

Lift the frame with a hydraulic jack and adjust it on the jack stands that can hold the weight. Get under the hood and access the plastic caps.

These are clamps that hold the upper portion of the front bumper. The manufacturers insert them in the top to the bottom pattern for maximum security for the protection bar.

Hold them manually and pull towards yourself without breaking the top part.

Find the screws that hold the bottom section. They have a twisted and inserted configuration to stabilize the lower body of the equipment.

Take a screwdriver, adjust it on the nuts, move them counterclockwise and remove them. Identify the position of the wheel and move the wrench accordingly.

Within 2 to 3 minutes, you can find the disassembling position on either side. Next, find the wheel arches which make the rear tire accessible.

They facilitate the steering of front tires due to built-in factory features. In addition, they have screws in the mounting holders which keep them connected with the frame.

Adjust a Philips screwdriver on these bolts and unscrew them from both sides. They spun in the upward direction while stabilizing the corners of the side wings.

Hold the fender flare and remove the sealant manually. Then, remove them from the frame without scratching their surface and keep them aside for future use.

Take the help of an assistant to hold and release the latch inside the wings. As a result, the bumper pops out of the mounting space.

Approach the fog lamps on the front area and remove their connector with a wrench. Next, loose and remove the connector of the parking sensor.

Access the speaker wires

The speaker wires of the Kia Sorento have a twisted configuration and run under the door panels and trims. These cords move towards the hood compartment and connect with the battery.

They are the tiniest and most complex cords in the wiring harness. The yellow and black electric cables pass under the rear doors.

The green and orange wires run under the trims of the right side door. The orange and black speaker wires connect with the negative terminal.

However, the green and yellow cords connect with the positive connector. The manuals of the latest variants have explanatory diagrams of these cords with their mounting points.

Unplug the sound cords

Find them according to their color variations and disconnect them. Approach the cord that produces the sound and disable it.

With insufficient knowledge, disconnect the speaker wires or take the help of a professional mechanic. For permanent disconnection, cut the wires with a sharp cutter.

Attach plastic covers

Use the plastic covers to hide the open ends of the electric wires. These are tiny components with insulation.

They can protect the working ends of the electric cords from high heat and moisture. The plastic covers stabilize their work performance and keep them intact for a long duration.

Reinstall the removed parts

Readjust the bumper on the mounting points and fix it. Reinstall the screws and tighten them in the fixation holes.

Add the clamps and stabilize the top side of the bumper. Then, access the battery and connect the positive and negative terminals.

Check performance

Switch on the SUV with ignition and get inside it. Handle the steering wheel, drive the vehicle to a less-populate spot and reverse it. Check the beeping sound and correct the errors.

Turning off reverse beep with push button

All the latest variants of Kia Sorento have a push button on the central console. It has a symbol of P and can disable the reverse noise manually.

Turn on the SUV, access the center console, and suppress the button for 1 to 3 seconds.

It immediately disables the reversing noise and facilitates sound-free riding. The models from 2018 to 2022 have this manual control feature.

How much time does it take to turn off the reverse beep on Kia Sorento?

You cannot disable the feature without removing the front bumper on this SUV. It is a time taking activity and consumes around 2 to 4 hours.

Its duration varies according to the vehicle condition and skills of a person. However, you can stop the noise within 4 to 5 hours.

However, the inappropriate knowledge about the speaker wires and lack of tools make it a time-consuming procedure. A professional can complete this complex activity in about 1 to 2 hours.

Why would you turn off the reverse beep on Kia Sorento?

Reverse beep on Kia Sorento is not appealing for regular drivers. However, due to the following reasons, several people disable this noisy feature on their luxurious SUVs.

Loud sounds

The driver puts the vehicle in reverse mode and immediately produces the beep sound. The noise level increases according to the vehicle speed in the reversing phase.

The passengers cannot sleep inside the vehicle due to noisy riding conditions.

Noise pollution

Reverse beep noise negatively impacts the learning skills of a driver.

It provokes stress hormones, reduces sleep, and affects heart patients. Young walkers change their passage because they find the beeping terrifying.

It is an advanced technology but affects the emotional health of travelers.

False indications

A false Revere gear instigates the loud beep noises. In a pacific spot, it annoys the other drivers and other people.

It provides false notifications about the reversing activities that lead to excessive time consumption. The driver behind the SUV stops and provides pavement.

The beeping vehicle stays in one spot and frustrates the surrounding drivers with a false sign.

What are the benefits of a reverse beep on Kia Sorento?

It is a versatile feature to facilitate a constant alarm for the nearby drivers, walking people, and children. It indicates the presence of a massive vehicle to avoid accidents.

Safety from bumping

Kia Sorento reverses in clear areas to prevent sudden bumping into other automobiles. In such circumstances, the built-in alarm starts beeping. It indicates the coming vehicle about its presence.

As a result, both vehicles remain away from each other. The reversing vehicle can never strike or scratch the frame of a camping vehicle.

It saves from fatal accidents and painful injuries simultaneously. In its absence, other automobiles can bump into the SUV due to a lack of notification and high-speed movements.

Notification to surrounding drivers

It is an advantageous feature to notify the surrounding drivers. The sound is loud and approaches the nearby driving person.

They also send the driving signals to coordinate exiting and entrance doors. It saves their lives from life-threatening incidents. It facilitates safe parking conditions without damaging the frame.

Alerting feature for walkers

It is a specially designed feature to alert the nearby walkers, cyclists, and pedestrians. As a result, the walking people immediately maintain a distance from the vehicle.

It notifies them about the danger and sudden striking of the automobile. The reversing lights turn on to warn the pedestrians in the dark locations.

Related Articles:

What is Included in the Subaru All-Weather Package?

How Far Can a Kia Telluride Go with the Gas Light On?