Skip to Content

How to Turn Off Subaru Forester Seat Belt Alarm?

How to Turn Off Subaru Forester Seat Belt Alarm?

Subaru Forester is a mid-sized SUV famous in America due to its high performance and comfortable seats. It also comes with a safety alarm on both the front and rear sides.

How to Turn Off Subaru Forester Seat Belt Alarm? You can turn off the Subaru Forester seat belt alarm by turning On the ignition. Do not start the engine; buckle and unbuckle the seat belt 15 to 20 times for about 25 to 30 seconds. In addition, it is better to use the OBD scanner tool to find the exact problem to fix it. The seat belt alarm turns on due to faulty sensors, damaged switches, and when you put heavy weight on the passenger seat.

You cannot permanently disable this alarm because it is law in some states to wear them while driving. However, the police can charge you a fine and tickets if you do not follow highway driving rules.

What is a seatbelt alarm?

A seatbelt alarm is a safety feature to reduce the number of accidents on the road. It is present in the latest SUVs for the safety of drivers and passengers.

Some vehicles have this safety system for both front and rear seats. It consists of an alarm and sensor to detect the various system.

The primary function of this safety feature is to detect the engagement of the buckle. In addition, it helps to alert the driver and passenger that you should wear your seatbelt before driving.

It is a good thing while driving on bumpy roads to reduce the risk of hitting the steering wheel.

It is one of the best reminders for aggressive and distracted drivers driving at high speed and without care.

It keeps you safe and secure inside your vehicle while driving at high speed and on bumpy roads.

How to turn off the seat belt alarm in Subaru Forester?

Some people want to turn off this alarm because it is disturbing during driving. However, there are two methods to disable this safety feature in your Subaru Forester.

Buckle and unbuckle method

It is the simple and easiest method you can perform in a few minutes without needing help from dealerships and experts.

In addition, it does not cost your money because you do not need any tools to do this process. You have to turn on the ignition of your SUV.

Turn on the ignition by using a start-stop button or key. Wait a few minutes after the ignition to start the engine.

The buckle and unbuckle methods help restart the system in case of any problem. For example, sometimes the sensor turns on because of faulty components and poor engagement.

You must buckle and unbuckle the seatbelt 15 to 20 times for about 25 to 30 seconds. Drive your SUV, and you can see that it turns off, and the light cannot come on the screen.

Use of belt buckle method

You can also use its buckles to turn off the seat belt alarm in your Subaru. These belt buckles mimic the action of the original buckle, and you cannot hear uneven sounds during driving.

It is not a reliable method because the police can catch you and you have to pay a heavy fine. Therefore, you can only prefer this method if you do not want to use this safety accessory in your vehicle.

You have to purchase compatible products from the market that meets the safety requirements of your SUV.

Put these buckles to engage the belts so the sensor cannot beep on the screen. Sometimes it is also annoying for drivers, and they find this method beneficial to turn off the beep sound.

Use of OBD system

The OBD system is an onboard diagnostic system in the latest models of various SUVs. However, the electrical system helps diagnose the issue in your vehicle.

Several dealerships have OBD scanners to find out the fault in various systems. In addition, you can take your vehicle to the nearby dealerships or servicing centers if the sensor is beeping continuously.

These service centers use the scanning tool to find out the exact problem. The codes appear on these scanning tools, and these fault codes represent the problem in specific parts.

You can quickly resolve the issue after diagnosing it with the help of a diagnostic system.

How to turn off the rear seat belt alarm?

Sometimes the rear seat belt alarm also produces noise while driving, disturbing both driver and passenger.

You have to turn it off for peaceful driving on the roads. Sit in your SUV and turn the ignition on the start and stop button.

Turn on the ignition and do not start the engine of your vehicle. You must lock and unlock the buckle several times to reset the programming system.

The unlocking means you have to strap or unstrap the buckle to reduce the beeping noise in your vehicle.

Why would the seat belt alarm turn On in Subaru Forester?

The seatbelt alarm in Subaru Forester turns on due to various systems problems. So you have to resolve this issue to get rid of the uneven noise.

Issue with switch

The switch is present on the buckle of the belts to alert the drivers to buckle up the seatbelts before driving on highways.

It is a small accessory that is not easily visible to everyone. However, it is connected with your vehicle’s electrical and warning systems.

The switch turns on the sensor when these are not latched appropriately before driving. Sometimes the buttons become bad due to wear and tear in them.

In addition, the excessive use and old switches also become faulty and cannot detect the signals accurately.

You can fix it by replacing the old switches with new ones.

Damaged sensor

The sensor is on the buckle of both driver and passenger seats on the front and rear sides. These sensors are helpful because they alert drivers when seat belts are not latched correctly.

These sensors are small devices that become out of function early. In addition, the frequent use while fastening and unfastening the belts also makes them faulty.

The sensors also get damaged due to accidental spillage of water and drinks on seats. Sometimes while driving on bumpy roads, water enters these sensors.

It works with an electronic component, and the presence of moisture makes them faulty. The faulty sensors turn on the alarm while driving.

The continuous beeping sound while driving disturbs the driver and also causes distractions.

Damaged buckle

The buckle is made up of plastic material that wears out early. It has a specific life, and you must change it for its perfect usage.

The buckle also gets damaged when you put stress on it while locking and locking the seatbelts. In addition, the wear and tear come with them due to their long-term use.

Moreover, parking in areas where sunlight directly enters your vehicle also increases the risk f wear and tear of these buckles.

Exposure to sun heat decreases the longevity of this component. You have to install the new buckle for appropriate locking and reduce the risk of accidents on roads.

You should carefully purchase the new buckles for your vehicles.

Unbuckled seat

The alarm also starts to beep when seatbelts are not locked accurately. Sometimes you forget to wear them while driving, and the sensor produces a beep sound to make you alert.

In addition, you cannot lock this component appropriately due to a damaged buckle. The poor installation of new buckles also causes this problem. ‘

Moreover, when you purchase the new one with a different design, it can also cause poor problems.

Many people do not want to wear them while driving because it irritates them. So the sensor detects the unbuckled belts and turns on the sensor.

Problem with wiring

The wiring is also present on the seatbelts system because of their connection with the electronic and wiring system.

The poor wiring harnesses and their connections cause the sensor to produce noise in your Subaru Forester. It is disturbing for drivers who cannot concentrate properly.

The wiring harnesses are wrong due to poor connection with connectors. In addition, the wires also get damaged due to their old age.

The broken wires also cause the issue and turn on the seatbelt alarms. You can only resolve the issue by fixing the broken wires and replacing them with new ones.

Weight on the passenger seat

The weight on the passenger seat also causes this issue in your Subaru. The system detects someone is sitting and not wearing a seatbelt.

Many people take their pets with them for an outing during the evening. The pets do not wear belts, and you can hear sounds from your vehicle.

In addition, many people put their bags and other accessories on the rear side passenger seats, which can cause an issue.

You can also put grocery and shopping bags on rear seats, but sensors sense it wrong.

Related Articles:

Can You Change Time in Subaru Forester?

Why is Subaru Outback Eyesight Turned Off by Itself?