A flasher relay in Ford F150 controls the turn signals in emergencies, handles the hazard lights according to the manual signals, and keeps the pickup truck safe from accidental conditions.
In addition, it gets electric power from the truck battery, and the central circuit facilitates the high voltage. People consider the flasher and relay as separate components.
Where is the Ford F150 Flasher Relay Located? Ford F150 flasher relay is located near the relay block on the right side of the steering column, in the heater section, and on the drive side under the seat. In addition, it is present under the relay housing and connects with electric wires under the dashboard. By knowing its location, you can troubleshoot the internal problems, secure the sensitive relay, control its performance and replace it quickly.
Moreover, you can find it on the dashboard at various points with protective coverings and variable positions. In addition, it comprises the direct current passage with minimum voltage surges.
It can stop working due to excessive use, alteration of an electric circuit, and internal wearing. These situations require instant repairing and control conditions.
You can find the equipment according to manual instructions. Also, take professional help for replacement procedures.
What is the Ford F150 flasher relay and its mechanism of action?
The Ford F150 flasher relay is an electrical part that controls the turn signs and hazard lights flashing. It identifies and handles the surrounding problems with internal sensors.
Moreover, a single relay module controls handle multiple emergency lights and signals. The flasher connects to the 12-volt direct current circuit and gets a continuous electric supply.
Also, it can handle a maximum current load without any damage due to built-in specifications. It works for turn signals within a few seconds and protects the pickup truck from road hazards.
Moreover, the flasher relay is located on the instrument panel of a Ford F150, and you can access it conveniently. The user presses the button for input signals that direct high voltage to the hazard bulbs.
As a result, they lighten up immediately and indicate the surrounding drivers. Moreover, all the front and rear lights turn on and respond to the input signals.
Different Locations of Flasher Relay on a Ford F150
Flasher relay has different mounting locations on the Ford F150 but normally it is present near the dashboard frequently.
Near the relay block
It is available near the relay block on all 2014 models of F150. Also, you can find it on the right side of this compartment.
The flasher relay exists in a similar direction on the side of the steering. But, it is not present without any covering. Instead, you can find it below the dash compartment.
In addition, two screws hold the dash trim from the passenger side. In such circumstances, use an appropriate screwdriver, insert it into the screws, and rotate them anti-clockwise.
Then, adjust the flat side of the slotted screwdriver inside the dash and truck surface. Now, pull it upwards and then, detach the cover and keep it aside. You can find the flasher relay near the relay block and column of the steering wheel.
In the heater block
Typically, a Ford F150 heater block comprises multiple relays for different activities. However, it is an electrically empowered section with other equipment.
The heater block contains the flasher inside the dashboard of the truck cabin.
But, it also follows the right side of the steering section. It works as an electric component that handles the flashing of lights and other signals. Typically, the 2000 Ford F150 flasher relay is located at this point.
Near the passenger seat panel
Typically, the outboard kick panels on a pickup truck contain different fuses, relays, and flashers. It works as a storage house for this electric equipment.
When you are looking for this device, check the front passenger seat. Then, identify the kick panel according to the manual instructions.
In addition, identify the presence of a flasher inside this panel. However, it is tiny, but you can find it on the front side of the board panel.
On the driver seat side
The flasher relay is present under the driver seat in the old models like the 1996 Ford F150. The identification is challenging because it remains hidden until you approach it.
In such conditions, sit on the driver’s side seat. Then, look down and follow the left side of the pickup truck.
Open the lid and find circular equipment of silver color. The round, sparkling tool is the relay that controls signals and lights.
These models comprise front and rear flashers. You can follow a similar passage for the relay identification on the backside of the cabin.
The emergency flasher relay is located in these hidden points, but you can find them by following these instructions.
Under the relay housing
There is relay housing up underneath the dashboard in a specific spot. You should follow the side of the passenger seat.
Then, sit on the seat and bow down towards the Ford F150 floor.
Find the housing that comprises multiple flashers and switches. In addition, remove the top and bottom securing screws with some tool
Moreover, place the screwdriver on the top side and pop it up. You may find a secure bolt beneath the cover.
In such circumstances, adjust a wrench on them and remove it slowly. They have up and downside positions with accessibility for better removal.
In addition, open the lid and access the front flasher relay. In 2002 models, these switches have a label of number thirteen, but it varies according to manufacturing standards.
Under the dash
It has different locations, but the 2011 Ford F150 has a relay under the driver’s side of the dashboard compartment.
However, it is a small switch, and manufacturers install them near the driver. It has electric connections with the turn signals through insulated electric wires.
Also, it attaches with the signal level for turns and other such complicated spots. In addition, the flasher relay connects with the switch buttons of hazard lights.
In such conditions, remove the dash covers by removing the screws and other supporting tools. Then, access the small switch on the front side and read the label.
It remains in the access of the driver and passenger. In such conditions, troubleshooting any technical fault is convenient, and you can repair it in a few minutes.
Why is it essential to know the location of a Ford F150 Flasher relay?
It benefits the mechanic and truck owner because they prefer immediate repairing conditions. However, they have different locations, but you can find them due to similar designs and specific shapes.
Identification of internal problems
When the turn signals malfunction and hazard lights show no flashing. Instead, it indicates the flasher relay’s internal damages that control these activities.
As a result, you can check and replace the flasher while knowing the exact spot. In such circumstances, you can quickly fix the issue.
Quick replacement
The driver presses hazard light buttons in emergencies, but the flasher does not facilitate them due to internal damages.
In such conditions, immediate equipment replacement is necessary with a functioning and high-quality relay.
Even a non-skilled person can find its location within a few seconds and changes the broken or worn-out flasher relay in less than 3 to 5 minutes.
Safety of fragile equipment
Typically, people avoid the pressurized conditions and heavy loads on the dashboard of the Ford F150 truck. However, they take extra care after finding out the location of these sensitive and fragile switches.
It keeps the flasher relay safe for a long time without any external damage. Moreover, the gadgets remain intact with stable electric connections.
Control of signals and hazard lights
Flasher relay connects with the lights and signals through electric wiring.
Any disturbance in their performance is a notification about a malfunctioning electric connection. Approaching the small equipment is far more feasible by knowing the exact location.
Related Articles:
Purge Valve Location on Ford F150
Replace a Purge Valve on Ford F150