Many people ask about the exact location of the tire pressure monitoring system reset button on various models of Hyundai Elantra. Consulting the manual and visual inspection helps to approach it on the front side of the cabin.
Where is the TPMS Reset Button on Hyundai Elantra? The TPMS reset button is near the steering wheel on the 2008 to 2011 Hyundai Elantra and mounts on the steering wheel bottom of the 2012 and 2015 models. It is under the car steering wheel of the 2016 to 2022 models.
It is a tiny black button with built-in sensors to identify the touch. It directly connects with the automobile module, which controls the tire’s internal pressure.
What is the location of the TPMS reset button on the Hyundai Elantra?
The tire pressure monitoring system has a specific button that can reset the internal settings of the module. Moreover, it can remove the warning light defects within seconds due to its standard function and specific properties.
The federal government of the USA has made a law supplementary for the vehicle. According to this regulation, all automobiles should comprise this TPMS to regulate the tire inflation level.
Due to the act clauses, all the models of Hyundai Elantra after 2007 have this TPMS system, specific module, and reset button. However, you can find it in all these models around the steering wheel for a better driver’s approach.
Due to its location, you can press it without looking at it directly. However, its mounting location varies according to the interior of its models.
But, it has a particular position nearby the steering wheel on the driver’s side of this vehicle. In addition, its few models use a specific direct procedure to monitor and stabilize tire inflation.
In such conditions, the tire pressure monitoring regulator can be on the dashboard near the automobile steering wheel. The models from 2008 to 2011 have the reset button near the steering wheel.
However, you can find it on the right corner of the steering wheel on the bottom side. Furthermore, you can find it on the 2012 variants.
In this model, you can find it on the lower side of the steering wheel. For assessment, you can check its underneath portion.
However, it has a variable location on the 2013 model. In this variant, you can approach it on the right corner of the steering wheel.
Moreover, the 2015 model of this automobile has it on the lower side of the steering wheel. Its latest models have a different mounting space for this pressure resetting button.
Its models from 2016 to 2022 have this button under their steering wheel. A few of the 2019 car trims have it on the bottom of the dashboard.
Also, you can access it on the left corner of the dashboard on this model. However, the latest models have it underside the steering wheel for a better manual approach.
How does the TPMS reset button work in Hyundai Elantra?
The experts and manufacturers of tire inflation sensors suggest resetting the module within the car even when the tire pressure is at a standard level. However, resetting the internal settings keeps the old record safe.
But, it makes the system efficient for identifying the modified locations of sensors.
To use this particular button, you can push it with your thumb. In addition, due to its functions, it can identify touch signals.
As a result, it activates and aligns the internal settings with the module. Due to its quick response, it takes an activation time of nearly 3 to 6 seconds.
After the activation procedure, it can deliver the resetting signals to the sensors of the Hyundai Elantra tires. However, these sensors are tiny and adjust on the tires for pressure control and better determination of traction.
In such circumstances, the signals move from the button and approach the sensors within seconds. However, these built-in, pressure-related sensors can consume 15 to 25 seconds to activate.
According to the identification procedures, the new sensors can activate within 5 to 10 seconds due to their high-quality response to the module signals.
In such procedures, the sensors identify the internal pressure flow and pounds per square inch of all the tires.
Then, the signals move backward to the module of the vehicle. As a result, the signals of these particular sensors indicate the module about the correct pressure level in the four tires of the automobile.
The module becomes free from the inflation problems of the tires. As a result, the vehicle module detects the other problems which cause a warning blinking light on the front side of the dashboard.
With this assessment, the module can reset the incorrect information. As a result, the flashing yellow signal disappears from the dashboard due to button-regulated reset procedures.
How to reset the TPMS with the reset button on Hyundai Elantra?
The yellow warning sign indicates the low pressure of the tires. Also, this system uses the electric supply of a car battery.
Therefore, it indicates the defects of the battery through continuous blinking. Sometimes, the light keeps blinking when the wheels have stable pressure.
It is a clear sign that the module requires a quick reset. For this resetting process, you can use the given button.
In such circumstances, you can find its mounting location on your car. Then, you can hold it for about 2 to 3 seconds and apply a specific pressure.
After the pressure application, you can hold it for a few more seconds. As a result, the light blinks and turns off about 2 to 3 times.
After a specific time, it stops flashing, and the automobile and its module undergo the calibration phase. During this calibration procedure, you can start the car and drive it for 10 to 30 minutes.
Due to this drive, the light disappears because the monitoring system of the wheels recalibrates. Sometimes, the light remains on the dashboard after the drive.
In these conditions, you can remove 2 to 5 psi from the wheels to increase the compatibility of the monitoring system, tires, and module.
Then, you can add the removed pound per square inch to stabilize the pressure and recalibrate the pressure monitoring unit. For the recalibration of the module, you can turn off the Hyundai Elantra battery and pull its positive wire.
Then, you can press the horn for a few seconds and remove the stored information from the automobile. Due to the battery connection with the TPMS, this procedure can recalibrate the system.
Related Articles: