Skip to Content

Will a Zero Turn Mower Fit in a Truck Bed?

Will a Zero Turn Mower Fit in a Truck Bed?

Many people prefer the zero turn mower for removing the large bushes and unwanted herbs from the lawn. They take it to their lawn by loading it on the truck bed.

Will a Zero Turn Mower Fit in a Truck Bed? You can fit a zero turn mower on the truck bed for transportation and take it to the lawn for grass cutting. In addition, you can place it on the pickup truck after accessing its dimensions with the trimmer. You can drive it to the bed by joining the high-quality lengthy ramp with the tailgate and securing it with the ratchet belt.

You can move it in all directions while driving it with levers on the sides. It can make the ground structure according to your demand in less time than the other machines.

What is a zero turn mower?

It is a small vehicle with a rechargeable battery, levelers for controlling during mowing, and a direct current motor for proving power.

There are levers instead of steering which connect it with the tires separately. This way, you can change the moving position of one wheel opposite the second wheel.

It gives your mowers the turning angle to change the moving direction. The mechanic adjusted the high-quality steel blades sat their specific position to cut the grass on the lawn.

You can choose the size and shapes of the blades according to your requirement. It will give different shades to your lawn if you use different blades.

There is a speed controller in it to manage the speed during mowing. The speed controller work by getting torque and transferring it to the axle.

Maintaining a slow and steady speed is better to get the best results. You can move it in the opposite direction by changing the position of the tires.

Moreover, it does not have brake pedals, so you cannot drive it on the slopes and steep paths. It is expensive but time-saving, so many people prefer it for trimming the lawn.

Turning the vehicle around its center is the best thing that helps you cut and shape the grass according to the adjusted height of the blades.

You can move it in zero degrees radius or 180-degree radius by moving the lever. When one tire is forward and the other is in the reverse direction, it will change the trimmer position without moving its center.

How do you fit zero turn mower in a truck bed?

You can fit the zero turn mower on the vehicle’s bed, but you should take the following steps for its safe transportation.

Check the payload capacity of the truck

Every vehicle has its payload capacity to bear the load on it. The payload capacity varies according to the size and models of the pickup.

First, you should ensure that you have a truck and then go for its payload capacity. Then, you can read it on the booklet or ask the dealer about the timer of dealing.

You should know the total weight of the mower and compare it with the vehicle’s payload capacity. If the weight of the grass trimmer is less or equal to the truck’s payload capacity, then you can fit it on its bed.

You can adjust its weight if it is more than the capacity of the pickup. In addition, you can remove the seat and other easily removable parts to reduce weight and take them on the other vehicle.

Measure the size of the mower

After weight measurement and adjustment, you should consider the size of the trimmer.

You can measure its length and width by using a simple measuring tape. Take one end of the tape, place it at its corner, and open it to the other corner.

You can record the readings and apply the same method to the other sides.

Access the dimensions of the truck bed

You should access the dimensions of the truck bed when you have done with the size measurement of the zero turn mower.

Use the same measuring tape and measure the length and width of the pickup bed. The bed size is less and equal to the size of the trimmer.

Both are safe if the bed size is a few inches greater than the mower. 

The grass trimmer remains outside the ed and disturbs the balance of the vehicle when passing through the bumpy roads.

The vehicle imbalance increases the chances of accidents; sometimes, the mower comes outside from the bed and falls on the road.

It is better to access the size carefully than load it o the vehicle. You can also call the other person or professional for its transportation.

Move the zero turn mower

You will need a ramp to take it to the vehicle’s bed. Therefore, you should consider the ramp length and quality while purchasing it from the market.

The ramp should be long because it will reduce the steepness so that you can drive it to the cargo bed. The short-length ramp makes the path steep and challenging for the zero-turn mower to reach.

You should consider the high-quality ramp to bear its heavy weight. Sometimes the low-quality ramp bend from the center, and the chances of damage increase. It can damage the equipment and injures the person who drives it.

The width of the ramp should be enough that can hold the wheels. It is better to measure the width of the tires and compare it with the ramp. Then, measure the tire gap and place the ramp on the truck’s tailgate.

You should lock it carefully with the tailgate and drive the mower on it. The professional recommends taking it to the bed without applying a brake in the middle of the ramp. You can reverse it to the ground if you face difficulty moving it.

Secure it

Apply the parking brake of the zero turn mower after loading it into the truck’s bed. It will keep it in its place while driving the pickup and reduces the chances of damage to the sides of the bed.

It is better to tie it with the ratchet belts to secure it. Moreover, it will help maintain its position if the parking brake is out of order.

You can transport without a ratchet belt, but it will be risky while passing through rocky and terrain roads. It can slide on the bed surface and damage it.

Why would you fit a zero turn mower in a truck bed?

It is a demanding vehicle with a comfortable seat for the driver so that you can do your work without getting so much tired. Sometimes you need to load it on your truck bed for the following purposes.

For shifting

You can fit the zero turn mower in your vehicle if you shift your home. It means you own it and run on the big lawn of your house.

You can safely transport it on your truck cargo bed and take it to the new place. Many players hire the lawn for golf matches but look at the ground condition.

They prefer to mow it before starting the match and ask the caretaker of that place. It makes the ground neat and clean for playing.

One of my friends has a large area he designed for recreational activities. People pay rent according to the time of that place and do camping and other interesting activities there.

He purchased it from the famous brand in that area but was confused about taking it to his place. It is the best way of transporting it by loading it on a pickup truck.

You can fit t on the bed with the help of the other workers and professionals. However, if you are shifting your equipment to your farmhouse, you can prefer to load it in your vehicle.

To repair

It stops trimming and cutting the grass due to its power supply and lever fault.

Sometimes the mower stops working during work but starts itself after a few seconds. It interrupts you and also affects the pattern of grass cutting.

You will face the rough and unequal height of the herbs if you run the slow-working vehicle repeatedly. Therefore, it is better to call the mechanic at your place if he is available nearby.

The mechanic will repair the fault on the spot, or he will ask you to take this to the workshop. You can bring it to the workshop if it has some major issue.

It is preferable to fit it in the bed of your pickup truck to replace the faulty motor. Moreover, you can return the worn-out blades, lever, and old seat with the new and comfortable upholstery when you bring it to the service center by loading it in your pickup.

Not street legal

The mower has wheels as the other vehicles for driving on the roads, but you cannot take it to the main roads and streets because it is illegal in the state.

Many people think they can run this small equipment on the road for transportation. It looks like a vehicle with wheels, a driver seat, and a power supply, but you cannot drive it through the streets.

The best way to take it to a distant place is through a pickup truck. You can hire the pickup from your friend and family for a short time.

It is better to take consent from the truck’s owner to fit the zero turn mower in it. The manufacturer designed the wheels of this small piece of equipment in such a way that it is not suitable to drive on the roads.

The surface of tires is only suitable for the ground and lawn. In addition, it will damage the pattern of the wheel when it rubs with the roads.

It is difficult for it to drive through the steep and rocky surfaces because it puts a burden on its axle. In this way, you need more force to turn the angle according to your need.

The blades beneath the vehicles are the main component that will get damaged if you drive them through the street roads. It will not perform its function well after passing through the rocky surface.

For grass cutting

You can cut and trim the grass on your lawn according to the area of the ground. The zero turn mower is fast and expensive, but you will have the best results.

You take it with you if you are a professional in grass cutting and designing the different grass patterns on the lawn. You need a pickup to fit in on the bed and take it to where you got an order.

In the same way, you can give it to your relatives and friends but also mention that they should take their vehicle with high payload capacity to load it.

Related Articles:

What Jobs Do Snow Plow Drivers Do in Summer?

Why Are Stock Trucks Lower in the Front?