Several individuals try to fit the wheels of their Nissan cars into the Honda Accord models because their lug patterns are identical.
Will Nissan Altima Wheels Fit Honda Accord? Nissan Altima wheels will fit the Honda Accord because of their similar size, matching bolt pattern, compatible offset, and their fitting in the wheel well. However, some models of Altima have different wheels and they will not fit the Accord due to non-identical bore sizes, prominent backspacing, and vibrations at high speed.
Fitting the wheels of other cars on the Accord is challenging because a few models have identical properties, and others have differences.
Why would the Nissan Altima wheels fit the Honda Accord?
Many people install the high-quality wheels of their Nissan Altima models on other cars.
Similar size of wheels
The identical size makes the wheels of one car compatible with another vehicle. However, the Nissan Altima was launched in 1993 and introduced several variants with variable wheel dimensions.
Its wheels are 235/45R18 (18 inches) according to their limitations. Also, the manufacturers provide them in sizes of 215/60R16 (16 inches) and 235/40R19 (19 inches) in a few models.
Its dimensions are 215/55R17 (17 inches) because of the designs of these cars and their compatibility with them.
However, the Honda Accord wheel’s dimensions are 215/60 R16 95H (16 inches). So, you can install them with the dimensions of 215/60R16 (16 inches) on the other car models that have tire dimensions of 16 inches.
All the models of the Accord from 2004 to 2005 have tires that are 16 inches long. They are compatible with the 16-inch wheels of the 2013 to 2018 Altima that have tires with dimensions of 215/60R16.
Matching bolt pattern
The bolt pattern of the wheels makes their identification and compatibility less challenging for car drivers.
The identical bolt pattern makes the interchangeability easy because the same number of bolts reduces the complexity of the procedure.
However, their bolt pattern means the number of holes on the metallic rims. It shows the number and distance among them according to their manufacturing characteristics.
You can determine the distance in inches, which shows the bolt pattern and indicates their compatibility. The models of Nissan Altima from 2002 to 2023 have a specific bolt pattern of about 5×114.3mm.
You can determine the bolt pattern as 5×4.5 inches because of the standard calculation and determination methods. The models from 1993 to 2001 have a bolt pattern of 4x114mm.
The Honda Accord models have a bolt pattern of 5×114.3mm in the seventh generation of the car. The 7th generation includes the models from 2002 to 2008, and their lug pattern has specific dimensions of 5×4.5 inches with five holes and studs.
They have a circle for the lugs with average dimensions of 114.3mm. These models have identical sizes of bolts with similar lug patterns.
Therefore, you would install them on the other car variants.
Many people check the offset of their wheels while installing them on the other cars because it indicates their compatibility for the swap.
However, their offset means the distance between the centerline and the mounting hub. It has negative and positive values according to its manufacturing properties.
The positive offset means the mounting hub is near the street or towards the front of their centerline area. The vehicles with RWD and front-wheel drive have a positive tire offset.
The negative offset means the mounting hub is more on the rear side.
It is on their rear side, near the centerline, and the value becomes negative. The offset of Altima older models with wheels of 195/65R15 (15 inches) is +40mm.
However, several models have stock wheels with an offset of +45mm to +50mm. A few models have tires with an offset of +55mm, which increases their compatibility with the Honda Accord, and you can fit them.
The offset of their tires is +55mm, which increases their compatibility for the swap.
The models with 17 and 20-inch rims have a stock offset value of +55mm. In such circumstances, you can fit the tires of your Nissan Altima on other car models.
Fitting in the wheel well
The compatibility of the wheel well is essential to fit tires of compatible dimensions. The wheel well is the mounting space for the tires that fit, regulate, and control them.
You can check various properties of the tires before installing them on your Honda Accord. Checking their offset, dimensions, and bolt pattern is essential before installation.
Then, you should fit them in the wheel well to protect the mounting area from scratches. The compatible and specific-sized wheels provide without scratching the fender flares.
They do not touch the mud flaps and improve their safety from scratches and damage.
Therefore, you can install them to the wheel well and keep the fender flares and mud flaps safe.
Why are some Nissan Altima wheels not compatible with the Honda Accord?
A few models of the Nissan Altima have wheel bore sizes that differ from the Accord because of the frame dimensions.
Non-identical bore sizes
You can identify a hole in the rear of the car wheels because of the stock designs. However, their bore has a specific measurement or size.
You can measure them in millimeters and identify their sizes for installing them from one car to another. A few models of the Altima from 1999 to 2001 have wheel bore sizes different from the Accord from 2001 to 2005.
In such circumstances, you cannot fit the tires of your Altima on the other car. The swap requires the replacement of several bolts and stock nuts to provide them with the original equipment manufacturer (OEM) components.
Also, the variable bore sizes make their fitting challenging. They do not fit with the standard OEM nuts and metallic bolts.
The bore size of its tires is around 66.1mm because of the designs.
However, the bore size on the Honda Accord is around 64.1mm because the manufacturing companies determine their dimensions according to their frame dimensions.
The differences in their bore sizes make them non-identical, and you cannot fit the tires of Nissan Altima from 1999 to 2001 models on the 2001 to 2005 variants of the other car.
Sometimes, a few people fit the tires of 17 to 18 inches in an Accord, which is compatible with the 16 inches wheels.
It leads to the problems of backspacing because the larger tires do not fit in the mounting well and fender flares.
They do not fit at the standard fitting level according to their installation. They can move backward on a turn, which reduces their performance and efficiency.
The backspacing becomes prominent because of the wrong installation. Therefore, you cannot install the large-sized tires of the Nissan Altima on the models of the other car that are compatible with the small-sized tires.
Vibrations at high speed
Many individuals install the wheels of their Altima models from 1999 to 2001 on the models of Honda Accord from 2001 to 2005.
They have non-identical bore sizes, which leads to wrong fitting. They do not fit despite the identical lug pattern because of the variable sizes of the bore that make the installation challenging.
They do not fit and vibrate because of reduced traction. Their vibrations increase at high speed because they remain loose and do not fit at the optimized efficiency level.
They do not connect the car frame to the roads because of the wrong fitting.
Why do people fit Nissan Altima wheels on a Honda Accord?
The car tires are susceptible to bursting, and they become flat. In such circumstances, the car owners require a spare tire for the replacement.
Many people fit the wheels of their Altima on the Accord variants because of their matching lug patterns.
They have identical tire sizes, which makes installation less complicated. So, people fit them on Honda Accord variants in emergencies.
The swap is affordable, and people consider these tires reasonable. These wheels have better fitting properties in the wheel well of the Accord.
People select and install them for the variants of the Accord while their wheels have identical offsets.
These are similar to five lug holes, and several variants have wheels with matching bore sizes.