Skip to Content

Black Series Camper Problems

Black Series Camper Problems

Black series campers make pop-up campers and trailers and people prefer their campers because of their comfortable interior design. 

Black Series Camper Problems include faulty showers that have low pressure due to clogged water filters. Their windows and roof hatch are not closed properly, causing the entry of rainwater into the inner side. In addition, it has the problem of uneven weight distribution, having more weight on the front side. The water tanks are not insulated, which can cause freezing of water and causes cracks in plastic tanks.

These campers are also beneficial because their interior is large and long enough to adjust different accessories.

Low shower pressure

Campers have bathrooms on their interior side so people can take showers. Many of my friends who used these campers complain that the showers have low pressure. The low water pressure will take more time for the bathing process.

These are also helpful for cleaning tires and other purposes, and they can cause a problem due to low pressures.

Many people who are using this camper say that they barely take a bath, and it is not suitable for removing mud from the vehicle’s tires.

The low-pressure issue is due to a manufacturing fault, which can clog the passage of water. Moreover, the narrow holes of the shower sieves will also decrease the pressure.

The holes of the shower sieves also become clogged due to dust, mold, and fungus growth and eventually block the passage of the water to come outside.

The filters also become clogged after some time and need replacement. 

You can fix it by using sieves that have large holes so water can move quickly through them. Moreover, you should also change the filters every 4 to 6 months to resolve this problem.

Poorly closed windows and roof hatch

The windows and roof hatches are present in campers for good air crossing to freshen the interior environment.

The windows of the campers are poorly sealed, and they are unable to close accurately. The inappropriate closing causes the entry of sunlight and water into the interior side.

Excessive moisture will cause the molds and mildews to grow there.

The growth of molds will also produce a foul smell in the inner side of the vehicles. The roof hatches do not close appropriately due to the fault of weather strips.

When these roof hatches do not close correctly, then during the rainy season, it will cause the water to drip into the interior side.

The water entry increases the humidity and makes the inner environment cold during the winter seasons.

Moreover, the mattresses of the queen-sized beds and chairs upholstery also start to damage due to excessive moisture.

You can fix it by changing the weather strips of the doors and windows to prevent direct entry of water and sunlight to the interior side.

In addition, you can fix the issue by parking them at a safe place in shady areas to decrease the exposure to rainwater.

Uneven weight distribution

The weight distribution of the campers matters a lot for its easy and safe towing with pickup trucks. The weight distribution of Black Series Campers is not accurate, which can cause unbalancing.

Most of the load comes to the front side because of a storage box and refrigerator on that side.

The maximum weight on the front side is problematic; it can damage its tires due to heavyweight. In addition, its maximum weight can damage the front tires.

Moreover, this problem will also cause poor stability and increase the risk of accidents and crashes. Finally, poor weight distribution makes them inappropriate for off-roading.

In addition, you also have to take care while driving Black Series Campers on bumpy roads. The excessive load on the front side will also wear and tear in their suspension system.

It can affect the different components of its suspension, including shock absorbers which make the vehicle bumpy while driving.

Due to uneven weight distribution, it starts to move at one side. The maximum load on the front side will also disturb the alignment of the campers.

You can fix it by placing the water tanks on the rear side to balance the weight. In addition, you can also put some load on the backside to make the correct balance and reduce the risk of accidents.

Water tanks not insulated

Water tanks are the basic need of an RV to carry water for washing, bathing, and cleaning purposes. However, many people complain that these tanks are not insulated properly.

It is necessary to insulate both the fresh and hot water tank of your camper. The insulating layer on the fresh ones will prevent them from freezing during winter.

Moreover, the ones that contain hot water are also beneficial to insulate because they can prevent heat loss and keep the water warm during winters.

They help maintain the internal water temperature for their better use during the cold season. However, due to poorly insulated tanks, the water freezes during cold weather.

It is difficult to run the taps and showers in Black Series Campers when water freezes because it cannot come out from the tanks.

Moreover, you cannot take a bath, cook the food items and wash utensils due to poor water supply. In addition, the freezing water makes ice crystals expand in size.

You can resolve this problem by using thermal blankets on the water tanks to keep them properly insulated and warm during winter days.

You can also wrap them with polyether paper for better thermal insulation.

Problematic spare wheel mount

The spare wheels in the RV are the requirement of people to change them in case of any difficulty. Therefore, the spare wheel is connected with this mount.

The tires get damaged and blow out for several reasons, but you can change them. In addition, these Black Series Campers have spare wheel mounts that can cause problems during the movement of trailers.

They get stuck with shrubs and other plants while moving in forestry areas. When they get stuck with shrubs and plants, they can also damage their structures and cause issue.

It will also produce scratches on glass windows and increase the risk of wear and tear. Moreover, when windows are opened, it can also increase the risk o injury.

You can fix it by removing the spare tire mount and making this surface smooth. You can also place spare tires at the rear side of the camper.

In addition, you can also add them on the backside under your furniture. The placement on the rear will also help adjust the weight distribution.

Low-quality interior and exterior

The interior and exterior quality of the camper also matters a lot during their manufacturing. Therefore, people always prefer to buy products that are of good quality.

The ones made up of good quality material will last longer and have more durability. However, the manufacturing company uses low-quality material in their manufacturing.

The exterior side paints start to blister, which gives them a bad look. The paint also starts to blister from the inner side because of low-quality paints and paint without primers.

Moreover, the cracks are also prominent in wooden cabinets and doors, damaging them ultimately.

The cracks are due to poor-quality wooden material to make doors and cabinets. The quality of their electrical wiring system in the Black Series Camper is also poor.

The poor electricity power supply will cause an interruption in tuning on the heavy electrical equipment like AC, refrigerators, and ovens.

They drain more power from the power source, and the system starts to trip due to the low quality of wires. You can fix this problem by preventing the paint from moisture, increasing the risk of exterior and interior damages.

Moreover, you can also avoid turning on the heavy electrical equipment simultaneously because the electrical system starts to blink.

Related Articles:

Faults with Host Mammoth Truck Camper

How to Heat a Camper Shell?