Host Mammoth truck campers were launched by two experts named Hogue and Storch, and they are famous in the RV industry.
Common Problems with Host Mammoth Truck Camper include faulty AC with improper sealing, which can cause refrigerant leakage that increases the electricity bill and decreases the working of AC. The other problem is a cab over leakage due to poor quality construction material, loose bolts, or damaged plastic seals. In addition, delamination of slide-outs is due to frequent opening and water exposure. They are also not suitable for off roads due to their heavyweight, disturbing the stability. In addition, electric jacks cause difficulty loading and unloading due to low-quality batteries.
They are manufacturing different styles of campers depending upon their size, type, and accessories present in their interior size.
Faulty sealing of AC
AC is a significant component in the RVs because you cannot live without them during hot summer days. It is difficult to survive in high temperatures, and they face problems sleeping at night.
The inappropriate seals of Host Mammoth Truck Camper AC reduce their working efficiency. In addition, it will also cause leakage of refrigerants from these systems.
The leakage of refrigerants will also increase the electricity bill and make it costly for people.
The increase in bills occurs because people turn them ON all the time, but they do not provide enough cooling to maintain the room’s temperature.
The seals are made up of plastic or rubber material they can damage due to physical stress or when they become old due to their elasticity with time.
The seals are present in the ducts of AC, so liquid passing from it cannot cause leakage. However, when there is an inappropriate seal, the liquid that helps maintain the temperature starts to leak from these pipes.
The leakage of conditioned air due to improper sealing also releases carbon monoxide into the interior side of the camper, which can cause suffocation and makes survival difficult.
Moreover, the unsealed ducts of the air conditioners will also cause the movement of dust, allergens, and other particles from the outside environment that are damaging.
The durability and longevity of the air conditioner will also decrease due to this problem, and it will increase to cost to buy the new one.
You can resolve this issue by installing the new seal joints to reduce the leakage of refrigerants. You should also check the leakage and notice it to take preventive measures.
Cab over leakage
The cab-over campers are the types of RVs that have been specially designed for placement on the truck’s bed.
The leakage in the cab-over occurs due to multiple factors, and you also have to control them to reduce the risk of damage.
They are leaking, especially in the rainy season, due to poor manufacturing material. The leading cause of water dripping is the screws present in these cab-over campers.
The rain rail screws are present in these campers, and they are not waterproof, which can cause the entry of rainwater into the interior design.
In addition, the issue will also come when seals of the windows and doors become loose and lose their elasticity and durability.
The seals are primarily made up of rubber material that becomes loose after some time of use or a hat near the surroundings.
The leakage will also occur due to parking in the open air during heavy rainfall or stormy season.
The entry of water in the interior side is damaging for floors of the camper, and it also makes the survival of the people difficult due to high moisture.
Host Mammoth Camper floors are also more vulnerable to breakage because they become fragile due to moisture.
The excessive humidity will also allow the molds and mildews to grow on the sides of RVs, which is damaging for furniture and other parts.
You can resolve this problem by checking all the materials before buying the campers. You can also install waterproof screws on the sides, preventing moisture into the interior side.
Delamination of slide-outs
The slide-outs are the most crucial RVs for creating extra living space. These are pre-installed in some campers, and you can install them if they are not present.
Many of my friends who used these Host Mammoth Truck Campers complain that the slide outs material starts to delaminate after some time.
The delamination will occur when you park them outside in the rainy season, which can cause their outer material to come off.
In addition, the delaminated surfaces give a terrible and old look to the campers. Moreover, the other reason for wear and tear in the exterior of these slide-outs will also occur due to regular exposure to heat.
The problem will also occur due to parking in the area where regular sunlight comes in contact with their surface.
The issue with the motors of the slide-outs due to poor electricity will also produce wear and tear in their exterior surface due to continuous opening and closing.
When water comes in contact with these slides outs, the surface becomes rusty, increasing the risk of wear and tears.
The exterior material starts to come off from one side and then spreads to the whole surface. Due to poor installation, it becomes difficult to close the slide-outs.
When you want to close them hardly, scratches will also produce on their surfaces. In addition, the delamination of their exterior layer will also cause their inappropriate closing.
They cannot close adequately, and water or dust will also enter through the gap due to the delaminated layer.
You can fix this problem by painting the delaminated surfaces with a high-quality varnish that cannot be damaged by water, heat, and corrosion.
In addition, you should also check the slide-out motors for their appropriate opening and closing without scraping their exterior layer.
Not good for off-road
The weight of the campers matters a lot when you put them on the truck’s bed. These RVs are poor for off-road because of their heavyweight and larger size.
The heavyweight will make them poor off-road because of poor stability when you place them on the truck bed.
Moving on the rough roads with them can cause moving at one side, which is dangerous and increases the risk of accidents.
Their higher weight can also make these Host Mammoth Truck Camper bad for off-road because they are disturbing the stability of the power steering wheel.
In addition, they are also bad because you need stable and high-quality tires for movement in rough or hilly areas.
Their heavyweight can also damage the tires and cause a blowout when driving on unstable surfaces by attaching these campers.
I recommend that you not purchase them if you are interested in off-road trips. Many of my friends are also interested in off-road for enjoyment, so I suggest they buy another lighter in weight.
The lighter ones are better for traveling on uneven surfaces, increasing tires’ life and preventing them from blowing out.
Off-road with these campers can also damage the truck’s braking system and increase the risk of accidents and crashes.
The issue with electrical jacks
The campers present the electric jacks to raise them for loading and unloading. It is a better choice than using manual jacks that are difficult to place on the lower side.
It is challenging to load and unload the Host Mammoth campers using people because they are too heavy; they use them for raising purposes.
In addition, it will also make the loading and unloading process easy with little effort. These electrical jacks also need electric power for their proper functioning.
When there is a gap between their bolts or they are not properly sealed, it will cause the accumulation of rust there and disturb the functioning of jacks.
Moreover, when you use more electrical components in the campers, including refrigerators and ovens, it is difficult for batteries to provide electricity to these jacks.
The problem with these jacks will also occur when batteries are not charged, which cannot provide appropriate electricity to raise the camper from the truck bed.
You can fix this problem by charging the camper’s batteries appropriately to raise the electrical jacks by using electricity from the batteries.
You should also adequately tighten the bolts and seal them for their correct opening and closing and prevention from rust between these gaps.
Related Articles:
Problems with Northern Lite Truck Camper