Skip to Content

How Do I Get My Chevy Malibu Out of Theft Mode?

How Do I Get My Chevy Malibu Out of Theft Mode?

Chevy Malibu has a theft mode with built-in sensors to protect the car from stealing. Fortunately, you can disable it in 10 to 20 minutes without professional help.

How Do I Get My Chevy Malibu Out of Theft Mode? You can get your Chevy Malibu out of the theft mode by resetting it through the battery, using the key fob, inserting the ignition key, and remote-less removal. It malfunctions due to the defective battery of the key fob and malfunctioning door locks. 

A professional mechanic costs around $45 to $56 to troubleshoot the malfunctioning system. To fix it, you may spend an average of $140 to $250. 

Theft mode is a safety feature with factory-installed sensors inside the cabin and outside the vehicle. They identify the compatible key fobs and unlocking methods.

The safety feature has a single electric circuit and an electrically empowered warning alarm. The false movements in the passenger cabin automatically turn on the detectors.

They activate due to unusual activities around the vehicle. The cabin sensors trigger a warning sound that indicates the stealing. However, the alarm turns off after a few minutes.

Thieves use bypass techniques and alternative ways to enter the vehicles. In such conditions, the built-in anti-theft system activates.

Advanced detectors have a potential approach toward incorrect activities. For example, people change the position of their automobiles to park them. Then, it alerts the sensors, and they produce loud alarming sounds. 

You can use manual and digital ways to get the Malibu out of theft mode. With the following techniques, disable it on your car within 20 minutes. 

Reset through the battery

The battery of the Chevy Malibu supplies electric current to the theft mode. Also, it supports built-in sensors for their standard work efficiency. 

Due to excessive usage and internal faults, the theft mode loses its standard efficiency. Instead, it appears on the dashboard, indicates the stealing, and cuts off the engine’s power.

Insufficient power and power loss are frustrating conditions for the driver. In such circumstances, the drivers disable the mode on their cars.

For this procedure, open the hood, access the battery, and identify its terminals. Then, disintegrate the power equipment by removing the negative and positive terminals.

It immediately cuts the flow of electric current towards the alarm center. Leave the detached connectors for nearly 10 to 20 minutes.

Then, re-plug the terminals in their mounting spots. Finally, it resets the information and defective codes of the feature. Due to these activities, the alarm and the safety feature turn off.

Use the key fob

The key fob’s battery can last for around 2.5 to 4.2 years. After that, it dies due to excessive usage, old age, and incorrect power system. With the dead battery, the mode becomes active.

It does not sense the correct signals due to a malfunctioning key fob, and the sensors trigger the alarms. In addition, replacing an old battery with already used equipment results in a faulty system.

You can arrange a new key fob to turn off the theft mode within seconds. It is the fastest technique to disable the alarm and warning sign.

The key fob has a specific button to regulate the alarm. Next, press it once and wait for 1 to 2 seconds. After that, it turns off the alarm automatically when you are near the vehicle.

A sudden road jump mixes the information signals. First, incorrect information approaches the sensors. Then, due to the mixed signals, they trigger warning sounds.

The sensors mix the jump with false information. They consider it a warning of theft and turn on the theft mode to protect the vehicle.

In such circumstances, press the button on your remote and immediately reset the system. You can adjust, stimulate, and regulate the system for unknown codes and factors. 

Remote-less removal

You can use this technique when you do not have a key fob. For example, several people use their physical keys to lock and unlock their vehicles. 

To turn off the mode, put the key in the lock of your vehicle’s door. For this method, follow the door on the driver’s side.

Utilize the physical key to disable the system in 5 to 7 minutes. Then, rotate the key in a counterclockwise direction and unlock the door of your car.

During these activities, never disengage the key from the lock. Then, rotate the key in the lock and hold it for around 25 to 30 seconds.

The built-in sensors identify the presence of a key on the lock. They check the compatibility of the physical key with the vehicle and other lock systems.

With the identification, they remove the stealing alarm and sign from the system. Next, check the movement pattern for the key on the Chevy Malibu.

Also, you can rotate it or move it back and forward. Next, remove the key from the lock and turn on the engine.

To deactivate the system, keep the cylinders in their locked position.

Use the ignition system

Park the vehicle on stable ground and start it. Then, insert the key of your car into the ignition hole. Next, activate the electronic appliances and technical control units. 

During these activities, never activate the engine of your vehicle. Instead, leave the inserted key in the ignition hole for around 11 to 16 minutes. 

Then, check the theft light and ignition light on the dashboard. Finally, rotate the key, turn it off, and leave it for a further 8 to 12 minutes. 

As a result, the system reboots and removes the incorrect information, and the alarm goes off. Next, check the battery on your car, optimize the power flow and start the engine. 

Furthermore, repeat the activity when the system does not disable. Then, reboot it by turning off the ignition and restarting the system after a few minutes. 

Use other disabling techniques when the system does not respond to this method. 

Reasons to disable the theft mode on Chevy Malibu

A flawed and malfunctioning sensor system does not allow peaceful driving. As a result, several people disable them on their vehicles by using reliable techniques.

It is a protection feature that activates a warning sign and alarm to secure the car. But, sometimes, it does not recognize the key fob and physical key due to its internal faults. 

The sensors cannot identify the keyless entry methods. A few people insert the keys in opposite directions. 

The sensors consider it a stealing act and reject the signals. To remove such problems, people disable them on their automobiles. 

Then, they drive in a comfortable environment without alarming sounds and dashboard notifications. 

Related Articles:

Which JDM Cars Are RWD?