Skip to Content

How to Enable or Disable Auto High Beam on Ford F-150?

How to Enable or Disable Auto High Beam on Ford F-150?

Many people use the auto high beam headlamps on Ford F150. However, I disable them when their sensors malfunction or the relay stops working. 

How to Enable or Disable Auto High Beam on Ford F-150? You can enable or disable auto high beam on Ford F-150 by pushing the option settings on the screen, pressing the vehicle option, selecting lighting and pushing the toggle forward for activation, and pulling it backward for deactivation. Use the steering wheel lever, move it forward, set it auto, and pull backward for disabling.

You can use them in night driving because they are the brightest headlamps of the pickup. However, I am a new driver and prefer them for regular and long-distance driving. 

How do you enable or disable the auto high beam on Ford F-150?

The auto high beam has one of the brightest lights to make the roads visible. In addition, they have automatic control in the Ford F-150. 

They provide bright light during night driving. Furthermore, they automatically activate and provide bright light. 

They have a specific camera that adjusts on the windshield. The camera has detection properties according to the internal built-in sensor. 

The sensor works on the backside of the rearview camera. The camera identifies the vehicles on the front side and returns the information to the automatic module. 

The camera does not provide information to the sensors and system when the front side of the pickup truck has no automobiles.

However, the camera has scanning abilities when you drive the truck at more than 30 miles per hour. For example, I drive my Ford F-150 above this speed, and the camera activates to scan the vehicles in front of the truck.

The system has a specific sensor with photoelectric properties. The sensor is present on the upper section of the dashboard. 

Also, you can identify this on the backside of the rearview camera for better identification and scanning of vehicles. 

You cannot adjust papers and stickers on the upper side of the windshield because it interferes with the camera and sensor performance. 

The automatic system can identify an automobile while its headlamps illuminate.

In addition, they have automatic performance and can reduce or increase their brightness range according to external reflections. 

Furthermore, they can decrease the glare for other drivers according to environmental light affect. I enable and disable them to use the brightness through automatic functions. 

You can access its settings on the display screen. However, the touchscreen shows multiple options to regulate various features. 

You can push the icon settings and open the next page. Then, you can select the option vehicle and approach the other tab.

Now, you can scroll through the settings and find the option lighting. You can push lighting once and approach the auto high beam tab on the top. 

It has a toggle for automatic activation and deactivation. You can push the toggle towards the right corner through your finger and enable them. 

You can pull the toggle backward and disable their automatic operation. In addition, you can manually set them in auto mode. 

You can use the steering wheel lever on the left side. However, it has a headlamp symbol. You can hold the lever manually, push it forward, and set it at the auto position. 

You can pull it backward and disable the automatic mode. 

Why would you enable auto high beam on Ford F-150?

Automatic beam headlamps have a variable angle according to their adjustment. Therefore, I enable them to utilize their maximum brightness.

Improved visibility

The auto high beam headlamps work automatically. Their sensor identifies the vehicles and pedestrians on roads. 

Then, it reduces the beam level to reduce the glare. However, it is beneficial for night driving because it makes the road visible. 

Improved visibility makes driving safe and protects from collisions. They increase driver safety by making the truck visible. 

Other automobiles become visible, which have activated headlamps. It has automatic movement from high to low brightness. 

The sensor detects the vehicle and makes it visible. I use these because they can produce maximum brightness at a specific angle and comprise an exceptional visibility range.

Withstand weather

High-beam headlamps work through a specific assistance system.

For example, they can automatically start scanning through the camera and sensor when the speed of the pickup increases from the recommended limit of 30 mph. 

They can withstand rain and foggy conditions. Furthermore, they have more brightness, and headlamps send direct beams on the road ahead. 

The light reflection increases during rain, and the headlamps switch to low brightness. As a result, you can drive them in minimum light reflection. 

I activate them for maximum security and safe driving. The light reflects from the fog, and beams increase visibility through automatic interchanging. 

Deflection of light

The Ford F-150 auto high headlamps can identify the other vehicles on the road. The headlamps of these vehicles illuminate to improve visibility and resist collision. 

However, the light rays of the pickup truck and other vehicles combine when their distance reduces. It causes deflection, which can distract the truck driver. 

I enable their automatic function for their quick mode swap. In such circumstances, the maximum brightness goes to a low level, which decreases deflection. 

Moreover, it reduces glare in the eyes of other drivers. As a result, it decreases the chances of crashes. 

I maintain focus on the road while the automatic headlamps are working. 

Protection from the light effect

The automatic high beam headlamps assistance works according to the external light.

It fluctuates between low and high brightness ranges according to the sensor-regulated scanning and monitoring.

The sensor identifies the darkness in the external ambient. As a result, it turns on the headlamps at a maximum brightness level. 

Moreover, it reverses the mechanism when the ambiance has more light. As a result, they remain in their lower range during the day driving. 

The sensor activates them when the weather becomes cloudy and external light reduces. 

Why would you disable auto high beam on Ford F-150?

Many people disable them because they do not drive at night. However, I disable them due to the following problems. 

Sudden flashing

They have a high brightness range. As a result, it causes flashing in the eyes of other drivers. Moreover, it reduces their focus and results in accidents. 

I disable them to avoid the sudden flashing because it can cause blindness for a few seconds.

In addition, it is a dangerous driving condition because the vehicles collide with your pickup and damage it.

Their deactivation keeps them in one position. You can use their low or high brightness according to your convenience. 

These sensors do not shift headlamps automatically. However, it decreases sudden flashing and accidents.

Reflection on windshield

Many people keep the headlamps in automatic mode while driving their Ford F-150. But, I disable them because they can produce a reflection on the windshield. 

It happens because of their reflection and deflection properties. The windshield blurs, which reduces visibility. 

The sensors can identify road obstacles and pedestrians and shift the brightness range. But, it is not efficient for the windshield and truck driver. 

The excessive reflection on the windshield reduces driving security. 

Enough visibility

Several people disable the high beam headlamps when they drive during the day. I deactivate them when the ambient light is enough for maximum visibility. 

In such circumstances, the driver does not require more light to make the other vehicles and objects visible. The environment light makes pedestrians, automobiles, and road things visible to the driver.

You can disable them and restrict their automatic shifting in different beam modes because it can affect the efficiency of the truck battery.

I prefer their deactivation because they are not essential during daytime driving. 

Related Articles:

What is the method to check the brake fluid level on Ford F-150?

How to Reset One-Touch Auto Windows on Ford F-150?