Skip to Content

How to Extend Run Time on Ford F-150 Remote Start?

How to Extend Run Time on Ford F-150 Remote Start?

A few states of the USA have the lowest temperature range of -17°F (-27°C), which can freeze the engine oil of the Ford F-150. I increase the run time on its remote to warm the truck engine before getting in the cabin.

How to Extend Run Time on Ford F-150 Remote Start? You can extend the run time on Ford F-150 remote start by pushing the lock button, closing all doors, pushing the start button once, and pressing it again within three seconds.

Extending the run time improves driving relaxation. Therefore, I extend it from the standard limit to run the engine at the operating temperature. 

It can increase its efficiency to provide high horsepower.

What is the method to extend the run time on Ford F-150?

You can start your Ford F-150 through the remote. It can turn on the engine before you enter the truck. Its extended run time improves the rotations per minute (RPM). 

It stabilizes its operating temperature. Moreover, it increases the warmness of the truck interior during cold weather. 

It is an advantageous feature when the external climate is cold. It can warm the interior when it idles for a specific span. 

It is high-tech and versatile specifications to improve the motor and interior temperature.

A cold engine can undergo more friction-based cracks. However, the run time increases and stabilizes its operational temperature, which decreases cracks. 

The motor oil freezes when the external environment is cold. Therefore, you can run the motor for a specific duration and melt the oil for maximum flow. 

It is an additional span for the truck warm-up. However, the manufacturing factories provide the remote of the Ford F-150 with a pre-adjusted span. 

It has a specific range of 10 to 15 minutes. You can extend this time by using a specific method. In addition, it can exceed about 30 to 35 minutes. 

The truck owner extends this from 15 to 35 minutes when the external environment becomes excessively cold. It affects engine performance, and you cannot cold start the motor because it causes mechanical faults and failures. 

You can hold the remote of your pickup and press its lock button on the key fob for 1 to 2 seconds. 

Pressing it can automatically lock all the truck doors. You can push the start button on the remote. 

The duration for this extension is only three seconds. However, you can push it again within three seconds and extend the engine run time of your pickup truck. 

Why would you extend the run time on Ford F-150 remote start?

You can increase the engine running span before entering the Ford F-150. However, I extend it for the below advantages. 

Engine optimal temperature

The truck engine works at a specific temperature. It has a range of about 180°F (230°C). 

The high and low temperatures are dangerous for its performance. You cannot run the motor at cold temperature conditions. 

It can damage the camshaft and pistons. Furthermore, it can undergo catastrophic damage. 

I extend the running time on the truck remote. It can increase motor efficiency and stability. 

Also, it improves its lifespan and protects it from damage. In addition, the motor works at optimal temperature and stabilizes the interior heat level. 

The low operating temperature limit affects the fuel economy of your Ford F150. The emission rate increase and causes environmental pollution. 

More emissions can increase fuel consumption which affects mileage. You cannot extend the run time of your truck motor more than the recommended limit. 

It can increase the heat level of the motor and cause damage. 

Better start

The Ford F-150 variants have high-performance engines which produce specific horsepower. However, they need a particular temperature for their starting conditions. 

You can start the motor at better rotations after increasing the run time on the remote start. The procedure takes a few seconds. 

You can alter the span according to the weather temperature conditions. The motor can start at a better level to increase the performance and acceleration of the pickup truck. 

You can start the truck without the motor idling. In such circumstances, the motor provides maximum power to all the connected components and enhances their efficiency. 

You cannot exceed the span more than the suggested range because it affects the engine performance.

Required cabin temperature

You can warm the cabin by increasing the running time on the key fob. It makes the cabin cozy and comfortable when you enter the truck. 

You require a specific temperature in the truck cabin for long or short driving conditions. You cannot control the steering wheel, brakes, and other control components when the cabin temperature is low.

However, you can adjust and increases the engine run time through the keyfob modification. Then, you can change the ambiance of your pickup truck cabin. 

It provides a comfortable sitting environment for young and old travelers. However, the low temperature can affect the driving conditions. 

You cannot control the steering wheel with your freezing-cold hands. It reduces the driving control over the acceleration pedal and brakes. 

In such circumstances, the chances of dangerous collisions increase. You can increase the motor rotations span before you enter your pickup truck. 

Then, you can get maximum control over all the mechanical components. The tires stabilize, and you can drive in a comfortable environment for a long time. 

The frame does not undergo vibrations because the stability improves. 

Lubrication of engine parts

You can drive the Ford F-150 while its engine runs at its highest rotations and maximum stability. The engine oil freezes when the external temperature of the environment reduces. 

The oil loses its performance capabilities during this state. This is because it clogs different fuel and oil flow passages. 

In such circumstances, the oil cannot provide enough lubrication to all the components. As a result, it loses its free-flowing abilities, reducing lubrication capabilities. 

The oil cannot stabilize the efficiency of different motor components. Reduced lubricant flow increases the internal lubrication of various parts. 

They rub against each other, which leads to their cracking. Furthermore, the damages become prominent, and the engine loses performance. 

It does not support the standard combustions, which reduce speed. As a result, the truck efficiency decreases, and you cannot start or stop the Ford F-150 through the standard method. 

You can increase the idling time of your truck motor. This is because the mechanical parts get more time for their movement. 

The internal temperature of the motor increases and melts the oil. It increases the flowing properties of the lubricant. 

Also, it reaches all motor parts and provides lubrication for their stable movement. As a result, the friction level decreases, and you can start the motor instantly without significant vibrations or damage. 

Does extending the run time on the Ford F-150 reduce the fuel economy?

The engine uses the fuel of the Ford F-150 for run time. But, it does not affect the fuel economy of the pickup truck. The running speed is slow. 

Therefore, it can utilize about 0.6 to 0.9 gallons for the adjusted span. However, it does not reduce the gas mileage of your pickup. 

It does not reduce gas mileage. The engine follows the old gallons per mile before and after idling. 

The motor can use half a gallon in about 60 minutes. Therefore, according to this estimated value, the system does not utilize excessive fuel.

In addition, the consumption rate varies according to the size of the engine. You can run it for about 35 minutes instead of 30 minutes. 

The gas consumption rate does not change because the range is slightly different. 

Related Articles:

Use Active Drive Assist on Ford F-150

How to enable or disable speed sign recognition on Ford F-150?