2013 Nissan Sentra optional CVT transmission system faces several failures, and it has multiple problems with hundreds of recalls.
Is There a Recall on 2013 Nissan Sentra Transmission? There is a recall on the 2013 Nissan Sentra transmission due to the (CVT) continuously variable transmission failure, at 86000 miles to 87000 miles. This issue requires replacements of its parts and costs you $3900 to $3960. In addition, it has been recalled due to manual transmission failure at 91000 miles to 92000 miles, with repairing costs of $4100 to $4200. In addition, excessive jerky movements happen at 75000 miles to 76000 miles and require system replacement. Furthermore, the manufacturing company recalled it due to unwanted sounds and a locked gear shifter at 61500 miles to 62000 miles, and its replacement cost is $800 to $850.
However, the manufacturing company and the National highway-traffic safety administration test the car, issue recalls, and facilitate extended warranties, free repairing and replacement.
It is a four-door, compact car with a spacious interior, a 4-cylinder engine with a 6-speed manual transmission, attractive gas mileage, and efficient handling.
- 1 What is a vehicle recall?
- 2 Who issues the recall and how?
- 3 Which type of transmission does a 2013 Nissan Sentra have?
- 4 What is the transmission recall of the 2013 Nissan Sentra?
- 5 What are the problems with the 2013 Nissan Sentra transmission?
- 6 What did the Nissan company do for these recalls?
- 7 How much does it cost to replace a 2013 Nissan Sentra transmission?
What is a vehicle recall?
Car manufacturers perform multiple tests to ensure the vehicle’s performance, remove potential faults and confirm safety features.
They check the safety components through multiple tests and make it a secure automobile for regular use.
Also, they fulfill the government policies, parameters, and agendas by following the standard rules. But, a few faults appear after the vehicle enters the market.
The manufacturers are responsible for informing the consumers about the problems, and it is called a recall of the vehicle. In this way, the authorities ensure the safety of drivers.
Who issues the recall and how?
The NHTSA is a National highway traffic safety administration and works as a service that tests the launched vehicles in the market.
Also, the agency makes sure that the automobile fulfills the Federal motor laws and the Motor safety act.
The authorities select these vehicles from the market and perform different safety tests with the manufacturers.
The NHTSA never test the vehicles before they are available in the market and under customer use.
The testing authority informs the manufacturers about the faults and issues a recall. Sometimes the manufacturers issue voluntary recalls and have no impact on the highway authorities.
Which type of transmission does a 2013 Nissan Sentra have?
Its variants come with a manual, 6-speed transmission system.
However, it has an option of variable transmission, and you can have the advantages of an automatic system with a few modifications.
However, both types have different problems and sudden failures.
However, the 2013 Sentra provides a 28 mpg to 29 mpg in the city.
Also, the vehicle facilitates a mileage of around 37 mpg to 38 mpg on the highways with a manual system.
What is the transmission recall of the 2013 Nissan Sentra?
The 2013 Nissan Sentra has an optional continuously variable transmission, and it fails to perform appropriately.
It is the biggest reason for multiple recalls of the vehicle. However, it does not happen in the early life stages of the automobile.
The compact car covers more than 86000 miles to 87000 miles. The CVT issue leads to several problems, and you cannot leave the vehicle without repairing it.
However, the warranties of these automobiles expire, and you have to replace them on your budget.
More than 40 people complained about its automatic transmission on the online portal, and the authorities resolved their problems in around five months.
What are the problems with the 2013 Nissan Sentra transmission?
The 2013 model of Sentra has several problems with hundreds of recalls. I have explained five faults of the manual and automatic systems.
The safety authorities recalled these variants for these problems and resolved them accordingly.
It has an automatic system that changes with the gear ratio.
The failed CVT reduces the vehicle acceleration and speed levels on the highways.
As a result, the car undergoes frequent jerking during acceleration and loses starting power.
The procedure requires repairing this system and costs you around $3900 to $3960.
Such failures shutdowns the engine anywhere without any notification.
It reduces the safety of drivers and other travelers. In addition, its engines stalls at a speed of around 72mph to 74mph.
Failure of the manual transmission system
The 2013 Sentra manual transmission failure happens at around 91000 miles to 92000 miles, and it requires replacements of the entire system.
Thousands of users reported this issue, and the problems have the highest voluntary recalls.
A few people do not sell their cars after such failures and repair the systems.
However, the repairing involves several components replacement with fluid changes and costs you around $4100 to $4200.
Excessive jerky movements
One of the most reported issues is due to excessive jerky movement problems in this car. However, it requires instant repairing and can cost you $3500 to $3550.
In addition, these faults appear at 75000 miles to 76000 miles.
In a few circumstances, the problems are irreparable, and you have to replace these parts or sell the vehicle.
Locking of the gear shifter
A gear shifter is a knob to shift the gears according to the speed levels. But, it sticks in one position on the car, and you cannot change the gears.
The consumer reported this problem at around 61500 miles to 62000 miles. However, the repair does not require the entire gear system replacements.
You can replace the shifting knob with high-quality equipment for around $800 to $850.
Noise from transmission
The manufacturer recalled the 2013 variants due to a significant increase in gear shifting sounds. The frequent noises indicate the internal part damage and other such faults.
You can repair these problems at the first stage because it can lead to their replacement.
You can save thousands of dollars with an instant repairing.
What did the Nissan company do for these recalls?
The manufacturing company takes quick steps to resolve the recalls. However, the service follows the measures below and maintains the company standard.
The CVT transmission is defective due to manufacturing specifications, and the company extended its warranties to resolve these faults.
In this way, the customer does not pay for the replacements and repairing activities.
They offer warranty policies for around 8 to 8.5 years, but they expire at a specific level.
You can consult the dealer for a discount or check the vehicle before the warranty expires.
Free services and maintenance
Service portals provide free repairing, maintenance, and cleaning for the car due to these policies.
Moreover, it requires a vehicle at the service station in 4 to 5 working days.
Free transmission replacements
The manual or CVT replacement is free for the vehicles under warranties.
The company takes responsibility for all the failures and repairs them for safe use.
How much does it cost to replace a 2013 Nissan Sentra transmission?
The failing transmission system requires immediate repairing, and you have to alter the broken components to achieve better results.
This replacement for the Nissan Sentra is an expensive procedure, and it may cost around $3700 to $3850 for these procedures.
However, the total cost varies according to the type and services of the workshop.
In addition, you can rebuild this system and save a few dollars, but alteration provides better results. A few procedures involve fluid flushing and other replacements.
As a result, the total cost of the procedure leads up to $6500. Also, you can consult with different dealers and relevant services.
You can get a discount for such replacements by the company policies. The process takes around 7 to 8 hours, and labor costs $70 to $150 per hour.