Ford Fusion belongs to the class of mid-size sedans and is a popular passenger car in the USA with many features. Its prominence over its counterparts is the availability of all-wheel drive, hybrid options, and turbocharged EcoBoost engines. However, after its discontinuation in 2020, there is an increasing demand for spare parts from other models.
What Year Ford Fusion Parts Are Interchangeable? You can interchange Ford Fusion body parts for the front and rear end for 2006-2009, 2010-2012, 2013-2016, 2017-2018, and 2019-2020 models. You can also swap the engines with the same options in the 2006-2009, 2010-2012, and 2013-2020 variants. In addition, you can replace 6-speed automatic transmission for the 2010-2012 and 2013-2015 models of the car with 2.5-liter I4 engines. Furthermore, interior parts, dash panels, and windshields are compatible with the model years before the introduction of body style change from the manufacturer.
This article will guide Ford Fusion owners about replacing parts between different variant years of the car. We have highlighted the critical components that have high chances of damage during accidents or other reasons. We have also highlighted the sequence of body style changes introduced by the manufacturer in the vehicle.
Interchangeable parts between ford Fusion model years
Ford Fusion is a mid-size car in sedan body style from Ford and is available in 2 generations from 2006-2012 and 2013-2020 model years. The manufacturer has also introduced mid-year changes and facelifts within the same generations.
Most parts within the adjacent and subsequent years are interchangeable before any extensive upgrades.
Body parts belonging to the front end assembly like bumpers, hood, left and right fender, and headlamp assembly are interchangeable for the 2006-2009 and 2010-2012 model years, while the chrome grille is compatible for 2006, 2007-2009, and 2010-2012 versions.
For 2nd generation, front-end assembly parts are interchangeable for the 2013-2016, 2017-2018, and 2019-2020 models. Moreover, you can also use upgraded features from recent models by doing some modifications during installation.
Available engine options in 1st generation models of Ford Fusion are 2.3-liter I4 and 3.0-liter V6 for 2006-2009 models, and 2010-2012 models are 2.5-liter I4, 3.0-liter, and 3.5-liter Duratec v6 engines. 2013-2020 variants have 2.5-liter Duratec I4 and 2.0-liter EcoBoost I4 with turbocharger and 1.5-liter Ecoboost I4 for 2014-2020 variants in 2nd generation.
Other engine options are 2.7-liter Ecoboost v6 in the 2017-2019 model Sport trim level and 1.6-liter I4 with a turbocharger in the 2013-2014 variants.
You can replace within these model years with few modifications in electronics and wiring due to added new features each year.
Interior parts, including speedometer/instrument cluster, seats, radio system, and steering column, are compatible within the same or adjacent model years.
While heater assembly is compatible for 2006-2012 and 2013-2020 models of Ford Fusion. You can replace airbags for 2006-2007, 2008, 2009-2010, and 2011-2012 models for front seats, 2006-2008 and 2009-2012 models for the roof, and 2006-2009 and 2010-2012 for the steering wheel.
Similarly, for the 2nd generation, there are upgrades in internal parts like the speedometer/instrument cluster, radio system, seats, and airbags after a year or two. Therefore, you can replace these within the same model years without modifications.
Rear end parts include bumper assembly, tail lights, decklid tailgate assembly, and rear glass.
You can replace rear bumper and back glass assembly between 2006-2007, 2008-2009, 2010-2012, 2013-2016, 2017-2018, and 2019-2020 variants of Ford Fusion.
While other parts like tail lights and decklid tailgate are swappable for 2006-2009, 2010-2012, 2013-2016, 2017-2018, and 2019-2020 years.
5-speed manual and automatic transmission from Mazda are compatible with 2.3-liter I4 engines from 2006-2009 models of Ford Fusion.
While the 6-speed manual G6M and automatic 6F35 are interchangeable from the 2010-2012 model with a 2.5-liter I4 engine.
You can also swap it for the cars with 3.0-liter V6 engines from the same model year. 6-speed automatic compatible with 2.5-liter I4 engine is interchangeable for the 2013-2015 model Ford Fusion.
6-speed manual Ford B6 is swappable for the 2013-2014 model years with 1.6-liter I4 EcoBoost engines. 6-speed automatic transmission 6F55 compatible with 2.7-liter EcoBoost V6 is interchangeable for 2017-2019 models of Ford Fusion.
An electronic transmission HF35 compatible with 2.0-liter Duratec I4 engines for the 2013-2020 model of the car is also compatible.
The dash panel contains the necessary information and instrumentation for the driver to operate the Ford Fusion properly.
For 1st generation variants, you can swap it within the 2006-2009 and 2010-2012 years without a navigation system.
For the 2nd generation, it is interchangeable for 2013-2016, 2017-2019, and 2020 models with and without adaptive cruise control and center speakers.
You can replace windshield glass for the 2006-2009, 2010, 2011-2012, and 2013-2019 variants of Ford Fusion.
However, it also has rain sensors installed, and you need to look for their specific models for its compatibility. You can replace rain sensors for the 2011-2012, 2013-2016, and 2017-2019 variants.
Front door assembly, including glass and window pane, is interchangeable in all models of Ford Fusion in 1st generation from 2006 to 2012.
While individual parts like the front door switch are compatible for the 2006-2009 and 2010-2012 models. For the 2nd generation, door assembly and its parts are swappable for 2013-2015, 2016-2019, and 2020 models.
However, later models have advanced functions like power windows, and their compatibility also varies according to the same features in your vehicle. Otherwise, you have to make modifications to the wiring to make them work.
Electrical parts like the alternator, fuse box, blower, and starter motor are compatible with each engine option, and you can swap them for 2006-2009, 2010-2012, and 2013-2019 models.
You can swap its wiper motor for the windshield for the 2006-2012 and 2013-2018 models. The coil/ignitor is also swappable for 2013-2019 models with the same engine options.
The electronic control module is also specific for each engine, and you can replace it for the 2014-2016 and 2017-2019 variants for 2.5-liter I4 engines.
To replace it with other variants, you have to change the wiring and make extensive modifications to make it work.
When did Ford Fusion’s body style change?
Ford introduced the first generation of Fusion in 2006 with standard features of a mid-size sedan and some optional features.
In 2010, it received its first major update with complete interior and exterior design changes to improve its look. In 2013, the 2nd generation of the car was made available with body change to give it a modern, stylish and fresh look.
They also upgraded the front and rear body styling in the 2017 and 2019 models. In addition, they introduced several performance features in each year without significant changes in their body style.
How long will Ford Fusion parts be available as it is discontinued?
Ford discontinued the production of Fusion car models after 2020.
However, its parts are still available in the market, and the manufacturer provides support and services for the model.
However, within 2-3 years, they will no longer be available, and you have to rely on third-party spares or aftermarket solutions.
Moreover, junkyard stores are also a major supply source of parts several years after the discontinuation of a model.
Is it easy to Find Torque Specs For a Car?