Winnebago Micro Minnie is a small-sized trailer that is easy to tow and equipped with many accessories. However, people avoid purchasing them because of their low-quality furniture that can damage easily.
Common problems with Winnebago Micro Minnie include low-quality hardware, faulty AC, damaged electric sockets, a weak water heater, and an improperly welded coupler. Furthermore, there are issues with the closing of slide-outs, low-quality wood, failure of LED lights, and rust on the undercarriage.
You can purchase these RVs because they provide sleeping space for 4 to 6. It is less roomy but has more storage area with cabinets and drawers.
Winnebago Micro Minnie Problems | Solutions |
Low-quality hardware | Add new screws and bolts |
Faulty Air conditioners | Clean dust from air vents |
Rear camera issues | Clean dirt from rear cameras |
Weak water heater | Flush the plumbing lines of the water heater |
Improperly welded coupler | Reweld the coupler |
Issue with the closing of slide outs | Check the functioning of motor |
Low-quality wood | Add new bed frames |
Failure of LED lights | Check fuses and electric breakers |
Faulty electric sockets | Reconnect wires of electric sockets |
Rust on undercarriage | Use rustproof sprays |
Low-quality hardware
The hardware used to construct these travel trailers is of low quality and can damage easily. However, rust can also build on them due to their cheaper quality material.
The presence of nuts on the screws and bolts disturbs their functioning and also increases the chances of their breakage.
Corrosion ruins the metal or low-quality steel parts and decreases their durability. The screws are also the wrong size and fall on the floor due to vibrations while driving.
These are not appropriately secured and come off from their surface. Moreover, the wrong-sized screw holes also cause poor fastening.
You can fix this issue by changing the corroded screws and bolts with new ones. Install the new screws or the correct size that can easily fit into the holes and fasten the items accurately.
Faulty Air conditioners
The air conditioners in Winnebago Micro Minnie are not working efficiently. As a result, it takes more time to maintain the interior temperature even windows and doors are closed.
These cannot cool the interior properly, and there is no leakage in the roof that cause an issue in temperature maintenance.
The problem occurs due to the accumulation of dust and dirt in the air vents of the ac after some time. As a result, the vents become dirty and cannot supply enough cold air.
The constant working of the air conditioner drains the battery and increases the recharging cost. You can fix the issue by cleaning the air vents and installing the new filters.
Remove the dust from the surroundings so it cannot accumulate on the filters of air vents and cause an issue in the cold air supply.
Rear camera issues
The rear camera stops working and produces blur images on the screen. The blur image issue comes from dust or dirt on the cameras.
In addition, sometimes your screen does not illuminate or show the rear view when you engage in the reverse position.
It occurs due to poor connection and broken wires that connect the rear cameras to the front side. In addition, damaged or faulty sensors of these cameras also cause problems.
You can fix the issue by removing dust from the cameras using a soft cloth. Clean the fog from their lens while driving in winter and check its wirings.
Weak water heater
The water heater becomes weak and takes more time to warm the water in winter. As a result, you have to wait for several hours for warm water.
It also increases electricity or propane consumption because of continuous use. the water heater becomes weak when less water passes through the pipes because of the accumulation of sediments and dust.
The contaminated water passes through these pipes and clogs them. Moreover, minerals that are present in water also clog the pipes and cause this issue.
The leakage in the pipes also causes an interruption in the flow of warm water. You can fix the issue by cleaning the plumbing lines to flush the sediment accumulation.
Identify the leakage in water pipes and replace them with new ones.
Improperly welded coupler
The coupler is a small device attached to trailers to connect with towing vehicles. It combines the hitch with towing trucks to secure them.
Many people face the issue of the stability of these RVs while driving them. The stability problems occur due to poor attachment of couplers.
Sometimes the welding is not proper and causes their poor attachment. For example, you can face leaning and swaying while driving because of the incorrect attachment of the coupler.
Less stability reduces the traction on the road, making it difficult to control them in windy situations.
The decrease in driving stability increase accidents, and you cannot hold the steering wheel correctly. You can fix this issue by removing the coupler and attaching them again.
Issue with the closing of slide outs
Many people complain that they cannot close the slide-outs completely. However, you can see the space of about half inches from the front side when you close them with a switch.
Improper closing occurs due to malfunctioning of motors and their components. Sometimes these get stuck and do not move forward.
The improper closing causes water leakage inside the cabin and increases humidity.
In addition, the accumulation of dust and foreign objects inhibits their proper closing. Inspect the motors to ensure they are working correctly.
Open the slide-outs and remove the debris and other small particles from their sides.
Low-quality wood
The wood material used to manufacture Winnebago Micro Minnie’s furniture and floor plans are of low quality.
Many people complain that the wooden frame of the beds breaks easily and has less weight-holding capacity. In addition, it can collapse when more than 3 to 4 people sit o them due to their less strength.
Moreover, soft spots are formed on the wooden floors when you place furniture on them because of their cheaper material.
Cabinets in kitchens are also vulnerable to cracking and fading. You can fix the issue by adding a new bed frame made of high-quality wood.
Avoid placing the furniture in the same place for a longer time.
Failure of LED lights
The LED lights that are present to illuminate the interior become faulty. It is problematic for people who have to do their work at night. In addition, LED lights stop working due to their blown-out fuse.
The surge of current through electric wires also damages these lights. Moreover, overheating and consistent use also decreases their durability.
Check the fuse and circuit breakers when these lights stop functioning. In addition, it is also better to check the wirings that are providing electric current.
Replace the blown-out bulbs of these LED lights with new ones.
Faulty electric sockets
Several electric sockets are present in the interior of the trailers so you can switch the electric components and charge your devices like phones and laptops.
Sometimes these sockets stop working, and you face issues in charging the phones. The issue comes from less charging of the battery that does not supply current in sockets.
The loose wiring harnesses and their connections also make these sockets poor. In addition, the primary outlet failure and broken wires inside the circuits cause malfunctioning of sockets.
Check the connections of the internal circuits, and reattach the broken and loose wires for proper electricity supply.
Rust on undercarriage
The undercarriage is the lower part of the RV or the chassis that holds the weight. These are made up of low-quality aluminum or steel material that become rusty.
Rust also builds up on their surface due to the absence of rustproof coatings. Antirust coatings act as the barrier between the undercarriage surface and corrosion.
The rust also comes on them because of poor cleaning practices and dust accumulation. In addition, exposure to mud and salts from the road causes this issue.
You can fix this problem in the Winnebago Micro Minnie by maintaining the cleanliness of your trailers. Wash the lower side when you come from outside to remove road salts and mud.
Moreover, coat the lower side with rustproof material to resolve this problem.
Related Articles: