You can mount a toolbox in your truck bed with these easy DIY methods. It helps provide better storage capacity and provides security, and helps you to organize the tools easily.
How to Install a Toolbox in a Truck Bed? You can install a toolbox in a truck bed by selecting a suitable location, add rubber pads, fix it with J-shaped hooks, and secure it with plastic stripes and brackets.
It provides safety as it protects from water and rain. Anyone can steal your instruments if they are present openly inside the vehicle.
How to Install a Toolbox in a Truck Bed?
A toolbox is an essential component of the truck, containing all the accessories required for the truck’s maintenance.
The gadget box comes in various types of materials. You can easily place it by following the below-mentioned steps.
The required items include measurement tape, screwdriver, nuts and bolts, and protective gloves.
Location to fit the Toolbox
Place the box in any position inside the truck bed. Firstly, determine if you like to place the gadgets container in front or back or on the sides.
After deciding the position, take your measuring tape and measure the gadgets container’s length, width, and height.
This measurement will help you finalize your decision about the instrument container’s position in the vehicle. You can make your own truck toolbox and place it accordingly.
Use Rubber Pads
To provide protection and safety, place a rubber pad according to the gadgets trunk’s dimensions.
Use a measuring tape to determine the instrument case’s length and then cut the rubber pad accordingly.
Fix the rubber pad on the surface to ensure that the paint remains intact and protected. Some pickups have dedicated liners that look awesome. You can use it when replacing the oxygen sensor.
Place the toolbox
Most of the instrument case has holes in the bottom. Place the plugs made of rubber in these holes.
After placing the instrument case, remove the rubber plugs, and fix it in the right position. To see the bottom part of the gadgets trunk easily, open the lid and add a kill switch at this site.
Use J-shaped Hooks
As you have fixed the instrument kit, attach it with the metal surface to screw the J-shaped hooks to fix it.
There is a gadget trunk with a wide variety of shapes, so you may be needed to attach a few j-shaped hooks to set the gadget case on the surface.
The J-shaped clips are very reliable, and they help to grip it firmly. So it will not tilt on any other side while driving and remain stable in its respective position. You can unlock your pickup without keys by using these hooks.
Fix the toolbox without drilling holes
After placing the J-shaped hooks, now is the turn of nuts and bolts. Most of the instrument containers have pre-drilled holes, so you have to fix the nuts and bolts.
Also, others do not have any holes. For this purpose, you need a drilling machine. The size ideal for the holes in the trunk is 3/8.
After drilling the holes of size 3/8, fix the nuts according to the desired size. Then tighten the nuts with the help of bolts. Apply lubricant at the nuts and bolts to ease the process of rotation.
After fixing the instrument trunk in the allocated location, test it by applying some external force. It will not tilt in any direction if appropriately set.
Also, you can go on a drive and test whether the nuts and bolts remain tight or not. If the nuts and bolts are loose, then tighten them again with a spanner.
Types of toolbox
Gadget trunks come in various varieties and materials.
Plastic made instrument cases have a short life and are not exposed to rust and corrosion because of plastic material. These are lightweight, so you can easily carry a trunk without any problem.
Gadget containers also come in aluminum material. Such trunks are non-corrosive and have a shine on their surface.
They have an aluminum surface and use a diamond layer to cover the outer body. They are light in weight and long life.
Aluminum made containers are best and affordable in price. So they are highly recommended by the experts. If you replacing the emblem on your Ford truck, you can store the parts in this section.
Steel made containers are not ideal and are have less life as compared to aluminum. They are heavy as compared to aluminum.
Paint is used to cover the outer surface. The paint helps to protect the steel trunk’s exterior from erosion, and it does not get rusty. Because they are heavy, the steel body trunk causes it consumes more fuel. So you should not buy steel made containers because they are not reliable.
If you do not have a trunk in your pickup and your instruments are spread open in the surface bed, there are more chances that the devices will get rusty.
It will be your partner in the hour of need when you require any items to fix an issue in the pickup. Keep your gadget box updated, and have a good journey.