Allen bike racks are famous due to their adversity, style and they add to the appeal of your SUV. On average, 50% to 75% of people select these bike racks for their SUVs.
How to Install Allen Bike Rack on SUV? You can install an Allen bike rack on SUV by selecting the right spot above the bumper, extend the rack arms, and adjust all the straps according to the manual. Next, attach the center strap below the bumper. Tighten it inside the hook, add a bike, and tight the rubber straps around it.
The bike racks of 26 x 17 x 6 inches are best for the rear side of the SUV.
How to Install Allen Bike Rack on SUV?
Here is a stepwise guide to mount the Allen bike rack on the backside of the SUV. Again, these are expensive items with maximum adjustment.
Select a compatible bike rack
The compatibility feature is one of the essential things during the installation procedures. Make sure it can cover the backside of the SUV.
Also, it must hold the number of bikes according to your demand. They have various sizes and colors according to the manufacturing brands.
Select it according to the rear bumper and holding capacity of your system. You can buy bike settlers online from authentic portals.
They also offer customized options, and the packages provide extra straps. If there is the availability of the top and lower hooks, then the adjustment is convenient.
They take few minutes for a precise and long-lasting installation. Therefore, always consider those items which fulfill the requirements. They are expensive products, but the results are worthy of these expenses.
Select the right spot on SUV
Select a spot for the adjustment of these items, and read the manual for better comprehension.
There is no need to mark the spots, and instead, you can observe the adjustment. Hold the rack and place it according to the point of attachments.
Ask a friend to hold it, and you can access the difference. In this way, there are minimum chances of any disturbance during the procedure.
Segregate the required stuff and then proceed to further steps. You can also mark the attachment sections with a non-permanent marker. It is suitable for those who do not have enough knowledge about the installation.
Remove the straps from a rack
Bring out the bike rack from the packaging and open the straps. The companies sell them with loose straps at particular points. Pull them outwards and detach from the hooks.
You can also count them according to your manual and then make a tiny alteration.
Open them one by one and never exert an excessive amount of strength. In such situations, you can break beneficial clips.
Extend its inner arms that are supporting parts of these racks that remain inwards during packaging conditions. They have plastic clips which hold them together until someone releases them.
Hold the clip and push it back, then open the arm in your direction.
Open them and turn them into a stand shape. Repeat the process for the other arms of your setup.
Adjust the clips again to hold the arms in one particular position.
Flip the rack and change its position so that the adjustment points face the top side of the SUV.
Open rear side and clean
Open the rear side of the vehicle and clean it for the adjustment of middle straps.
Use cleaning agents and a non-fibrous piece of cloth for such cleaning procedures. Allow the drying of the rear surface and then close the backside temporarily.
Adjust the Allen bike rack on the hooks
Hold it tightly and move towards the upper hooks of the surface. The sticky bottoms of the stands have the strength to stick on these particular points.
Push them inwards and then slightly pull them outwards. Next, adjust the lower side of the rack below the bumper on the steel hooks inside the vehicle bottom.
Attach center strap below the bumper
Hold the center strap and lose it approximately as much that it reaches the downside of the bumper. Adjust it tightly at these stops with the hook and then pulls it to check the stability.
Tighten it firmly without any loop in the middle or any other side. Hold it tight from the upper edge and bring it down and approach the hook.
If it is long, then move it backward in the middle clip and decline the size.
Adjust it without mistake because it holds the whole system in one state.
Adjust its parts according to labels
The side straps can mix due to unpack conditions. There are labels on these with plastic clips. The paper labels are directions about the adjustment of these items.
Hold one of them at once, and then add one side of the clip. Next, adjust the second long strap on another side.
Pull and spare them instantly to check any instability. Discard the loosening errors on the initial stages and then move to other steps.
Check the stability of the bike
Adjust one bike between the holding straps and fixation points. It is a procedure to check the adjustment and stability of the hike without any swaying.
It must settle without the support of holding things. Also, the rack should adjust the size of bicycles without any disturbance.
Never apply to push force for the insertion of items inside the rack. Make sure you avoid the pushing of rubber and plastic items during settlement.
Handle rubber and elastic parts
Hold the rubber straps that are small to medium. Access the long rods of the bike and then cover them. Hold one straight rod with one rubber strap and block the endpoints.
Add all the small rubber parts on the bike and never leave any strap without attachment. In the end, pull the long holding thing and then cover it from upside down.
The elasticity of the straps helps you to pull and fix the items deliberately.
Secure the bikes
Secure the bikes with the additional holding items that include in the packages. Adjust them on both sides of the surface and cross over the bike rods. They enhance the holding and handling capacities simultaneously.
Can Allen bike rack be installed on all SUVs?
These are universal for all SUVs due to their versatile built-in stability and other protection features. In addition, they arrive with supporting tie-downs and rubber strappings to hold the vehicle and bikes.
They offer complete protection from scratches and other damages on the surface of your vehicle. In addition, the racks have no adverse effect according to the size of the SUV, and it supports the weight of hanging things.
There are excellent in performance when you mount them on the backside. The support is available, and there is no need to stress about the bike falling.
The environmental changes have no adverse impacts on the quality and performance of bike racks. Its color depends on the driver’s choice, and you can customize the color according to your taste.
Why would you mount an Allen bike rack on SUV?
These items are beneficial to carry the bikes for adventurous journeys without hiring an extra vehicle. They remain stable and safe on the backside and to make your SUV look cool.
All of them offer maximum inner accommodation space in the SUV for the passengers. They remain unaffected by the rain and other heat effects.
There is minimal chance of surface damage due to high quality, but the poor performance can generate scratches.
No one can steal precious items from you due to constant protection from the rearview. In addition, they have enough tightness that no one can open their straps comfortably.
The security level enhances, and you can ride your bikes to long-distance places. The transportation of 2 to 3 items is also suitable for a small business.
What is the average time and cost to mount the Allen bike rack on SUV with tools?
The average cost of the Allen bike racks for the SUV is around $35 to $1200. It depends on the specifications and extraordinary features of the setup.
The cost is around $47 to $290 and includes the labor charges and tools like extra straps.
In few situations, the range enhances and can reach up to $350. Again, there is no involvement of tools, but you can get rigid straps for approximately $20 to $34.
The bike racks with available straps are quick to install without any disturbance. Read the manual to understand the fixation or take professional guidance from a technical expert.
They take around 15 minutes to 29 minutes for the complete installation. Practice and proper guidance decline the period, and you can adjust it between 10 minutes to 17 minutes with minimal chances of any dangerous conditions.
You can also take external help for their first-time adjustment on your vehicle. The professional person charges you few dollars but offers error-free installation in less than 10 minutes to 12 minutes.