The RV covers are protective layers over the surface, but they are vulnerable to ripping and tearing. The inappropriate installation, non-skilled handling, and lack of maintenance tear the fabric from different spots.
How to Keep RV Cover From Ripping? You can keep RV cover from ripping by using a high-quality cover with tight sides, protection straps, and buckle cover to protect fabric tearing. Also, allow cover breathing, prevents mold accumulation, and hides roof spots with foam blocks. Furthermore, stop ripping by blocking drains with tennis balls and covering pipelines with foam.
Also, paying extra attention to the gutter sprouts, pipelines, and roof vents can protect fabric tearing.
Cheap covers cannot fix on the sides and edges. Also, they can blow off the surface in high wind storms.
Compromise over quality can lead to several disasters, and it is advisable to protect the RV by selecting excellent coverage. It is better to choose an appropriate parking shelter during the winter seasons.
Also, park it under a shade after winterizing and store the RV with durable cover conditions. Weekly cleaning and maintenance also protect the fabric from sudden holes.
They have long life spans and can last up to six years. But, protection from damages can prolong their life. In addition, follow appropriate installation instructions because inadequate tightening can result in different tearing problems.
Use high-quality RV cover
Generally, a high-quality cover hides the entire layout of the vehicle and provides a compact appearance. Therefore, make a precise decision while selecting one of the covers.
Select them according to the size and measurements of the vehicle. It should hide the sides and corners of the setup. Also, it should spread on the roof without leaving any corner.
In this way, the environmental hazards cannot affect the cover. The high-quality fabric is water-resistant and repels ultraviolet rays. This way, RV covers keep water out.
They repel seasonal changes and keep the trailer safe for a longer time. In addition, the built-in durability features of the fabric provide protection coverage to the entire RV surface.
You can select the type of fabric according to the climate conditions. They have different styles, and thicknesses vary accordingly. Finally, hide the entire RV without leaving the free spots.
The tight covers are best because they leave no extra spaces for wind penetration. In such situations, the fabric repels the formation of holes, and you can prevent it from ripping.
Also, the prime fabrics prevent water puddles on the roof section. Therefore, you can avoid mold with maximum protection and non-sticking conditions.
Use protection straps
The protection straps are tied-down materials that control the RV cover. These are stronger than the nylon straps due to their propylene webbing.
They are long enough to cross the vehicle roof sides. The tie straps come in different packages of non-stretchable buckles.
Also, they are usually black with long cords and strap-holding clips at the end. You can tie them from one edge to another while using multiple straps.
Keep them tight on the roof and sides of an RV. Buckle them according to manual instructions and leave the fabric without fear of damage.
These straps protect from harmful wind effects. They do not allow air penetration inside the RV cover. Also, the wind pressure cannot tear the fabric despite multiple strokes.
They are beneficial for the extended life of its fabric. All of them avoid sudden ripping of cover middle or side edges.
Allow cover breathing
Typically, several RV covers rips due to non-breathing conditions. These protection materials are water and heat repellant. But, water accumulates in the form of droplets over the surface.
As a result, the cover requires enough interfacing air to avoid moisture. Use those covers that can generate an interface without getting harmful effects of wind pressure. You have to be careful; otherwise, RV covers can cause damage.
Also, remove the cover and dry it after water accumulation. Finally, dry the vehicle surface and remove all moisture.
However, the tarps are economical and appealing with different size ranges. But, they never allow breathability and are responsible for generating thick mold layers.
Also, avoid tarps because they can withhold moisture for long periods. It penetrates the RV, freezes inside under stored conditions, and causes damage.
Cover the RV roof spots
The RV roofs comprise vents, air conditioner holes, and other sewerage holes. The fabric hides these spots, but different shapes cannot resist the air and water effects.
The fabric breaks from these holes and drainage sections. Use the foam coverings for these spots and get them from auto stores in the moderate price range.
These foam blocks are of different colors and sizes. Also, people call them foam noodles that cover any shape of vent, screw, or pipe drainage hole.
You can clip the foam blocks with zip ties and small ropes. First, stabilize the RV cover on these spots and put the foam block. Then, push it inwards and prevent it from irregular mobility.
In this way, rainwater and air cannot reach these vulnerable spots. A foam block allows slight air-breathing and keeps the cover safe from ripping.
Nothing can strike these unbalanced spots directly due to these protection blocks. They are flexible but strong enough to protect the surface.
You can also add these blocking materials to the vulnerable edges of RV covers. They have quick installations, but selection depends on the customer requirements.
Block open ends with a tennis ball
The open ends of an RV include the drainage sections and vents. They are usually on the bottom sides and the corners. Dust particles, air, and water can penetrate these openings.
Also, the harmful materials and moisture result in cover ripping. The dust and moisture combine and result in fabric holes.
Use tennis balls to protect against such damaging conditions. You can purchase them from sports stores.
Use multiple tennis balls by making an X shape or round cut in them. Then, adjust them on the open vents and fix them one by one.
You can increase the size of the cut according to the measurement of a hole.
Also, park it under shade and prevent direct striking of air and dust particles. Finally, keep the surroundings clean and block these passages.
Protect the pipes
The water pipelines expose to rainwater, and wind affects them more than other RV parts. You can cover them with a high-quality cover, but they are susceptible to damage.
Also, the internal water leakage is non-indefinable in these setups. As a result, the moisture and water leakage destroy the pipelines and rips the fabric.
Prevention of such problems requires covering pipelines with other protection materials other than the cover. For example, use long foam blocks and hide the pipes.
Also, use duct tape for foam coverage. Then, hold the elongated foam cover in one spot and add multiple tape pieces. Finally, fix it with the RV surface and save the fabric.
However, it locks the internal leakage problems and repels external moisture effects on the RV cover. The selection of block thickness and color depends on the climate conditions.
Also, you can trim it with scissors and modify it according to an exposed surface of the pipe.
Related Articles:
Tips to Replace RV Awning Fabric on Electric Awning