Skip to Content

How to Make Your Car Safer in a Crash?

How to Make Your Car Safer in a Crash?

You have to prepare yourself for unwanted circumstances, like a car crash when you are driving on the road.

How to Make Your Car Safer in a Crash? You can make your car safer in a crash by adding better tires, a forward collision warning system, a blind spot system, and a reverse camera. In addition, you can avoid the crash by checking your back view and side mirrors, keeping an eye on the road, and being attentive.

You have to look out for help when you experience a car crash. It is better to fix all the damages and reduce the chances of accidents in the near future. 

What are the methods to make your car safer in a crash?

Older vehicles are vulnerable to crashes as they lack newer and advanced safety features. The following are a few methods for protecting your car during a crash.

Add Blind spot sensors

Blind spot sensors are the protection features mounted behind the rear doors of a car. 

With the warning system, you can assess the rear vehicles without leaning in one direction. However, older vehicles lack these sensors and cannot identify approaching danger.

In these conditions, the automobile undergoes severe crash and frame damage. You can avoid this issue by adding blind spot sensors to your automobile. The average cost to install blind spot sensors is around $250 to $470. 

To install the blind spot detection sensor, place a measuring tape parallelly along the wheels from front to back. Next, place the calibration cloth vertically at a 90-degree angle with the measuring tape. 

Place it parallel to the rare box or the bumper. It is better to remove the bumper and taillights. Then, take a cleaning cloth and rubbing alcohol to clean the inner of the bumper. 

Mark the position at a 20-degree angle from the rare box of the car. 

Place the magnets outside and on the inside of the marked spot.

With the help of the adhesive, stick the sensor inside the bumper. Mount the LED indicator inside the cabin from that you can see it easily while driving.

Installation of backup camera

If you do not have a backup camera, you are at risk of crashing. To avoid this condition, you should install a rearview camera.

It is an advanced technology and can show you the distance between your car and the vehicle behind you with the help of grid lines.

You can install a backup camera in your automobile by removing the battery terminals and cutting the power. Then, remove the license plate for the installation.

Select the mounting spot on the license plate, unbolt its screws and remove it from the frame. Next, adjust the camera in the mounting bracket, pry off the door panel with a sharp tool and make a tiny hole with a drill bit.

During the drilling, protect the electric wires inside the panel, cross the electric cord through the drill bit hole and attach a rubber grommet to secure it. 

Open the hood, access the fuse panel, and attach the electric wire to the factory-installed circuit of your car.

Next, turn on the battery and stabilize the power supply. Due to this installation, you can access the rear vehicles and avoid crashes.

Safe parking

Sometimes people park in open areas and alongside the roads. To avoid a crash, park your automobile in safe parking spots. Residential garages are one of the safest storage units to protect against car crashes.

Moreover, home garages have a compact layout with surrounding walls, a protection roof, and a rear electrically empowered door. 

Furthermore, the rear door is a barrier between the stored car and surrounding traffic.

Do not park near busy intersections, which increases their visibility to the surrounding vehicles, and as a result, they can hit the cars and damage their frames.

To avoid these unnecessary collisions, park your car away from those busy intersections. Never Park on the street corners because the other approaching vehicle cannot access it on the tight turns. It can cause hitting and damage to the vehicle.

Drive your car carefully

Mobile usage during driving is harmful to practice that can cause car crashes. In case of emergency calls, use a mobile phone holder or a hands-free. 

Sometimes driver does not keep a distance between the vehicles, and, in case of a sudden brake, the car can get hit by the rear end. 

While driving, keep your distance from the vehicle, especially the larger ones in front and behind you, to avoid crashes. Drive attentively and keep an eye on your surroundings. 

Avoid driving when you are feeling drowsy. Instead, drive at a safe speed limit in case of heavy traffic on the road and weather conditions. 

Also, wear a seat belt for your safety and with the help of a forwarding collision warning sensor situated below the front bumper. 

This sensor system informs you of the distance between two cars which detects the sudden movement of vehicles ahead of you. It warns you to keep a distance with the help of an indicator or audible alert system. 

Upgrade the tires, windshield, and windows

Always run a thorough check-up before going for a road trip especially check the tires before driving. Worn-out treads can become the reason for a crash if not checked sooner. 

Use high-quality upgraded tires to avoid accidents and prevent skidding of wheels. In addition, these tires provide a better grip on the road and help to stop the car sooner in case of sudden brakes. 

It is better to replace cracked windows or windshields because it can be one of the reasons for crashes.

In addition, a sudden strike of a flying stone can shatter the glass and cause injury, leading to diverting attention from the road. 

Use a tinted glass shield to avoid shattering and breaking. It is illegal to use tinted glass windows in some places, so it is better to check the windows’ condition to avoid any mishaps.

Installation of Anti-lock brake system

An anti-lock brake system can help prevent car crashes because this system provides better stopping power in sudden brakes. Moreover, it reduces the risk of slipping or skidding the wheels on the road.

An anti-lock system works by applying pressure on the brakes, holding, and steering to safety whenever you face the sudden need to apply brakes in an emergency. 

You can only install an anti-lock system when your car supports the ABS. 

You have to slow down your vehicle before turning the steering wheel when it does not have an anti-lock braking system. You have to push the clutch down in the manual transmission. Hit the brakes with much pressure until you feel the wheels are locking, and release the brakes after that.

What to do after a car crash? 

Do not panic after a car crash; calm yourself and look around your surroundings. 

Turn off its engine and turn on the hazard lights to indicate other vehicles on the road to slow down. 

Check yourself for injuries in case of severity and stay in the car. Call 911 and wait for the emergency personnel.  

When traveling with other passengers, check for their injuries and safety. Take out the emergency kit if you can come out of the car. If you cannot come out of the vehicle, fasten the seat belt, and wait for the ambulance.

Go to the other driver and, note down his name, check for his license plate, contact number, and insurance policy information. 

Report the incident and take down pictures of the incident and any damages to the car. Talk to the witnesses currently present at that time and ask for their names and numbers. 

You can do that only when the incident is minor, in case of severe injury and a major crash involving the police.

Take your automobile to the mechanic after the incident and get it checked to avoid future mishaps. In addition, it is better to install safety features to avoid the risk of accidents.

Related Articles:

How to Turn Off Lights Inside Your Car?

Heads-Up Display in Tesla Model 3