A jack stand is made of steel or aluminum that stabilizes the truck at a specific height. For example, a floor jack can raise the Silverado’s height, and a mechanic can move underneath the frame for repair.
What Size Jack Stands for Silverado 1500? You can use a 2-ton jack stand for 1999 to 2003 Silverado 1500, with a weight holding capacity of 4000 pounds, and it stabilizes the truck 16.6 inches higher from the ground. A 3-ton jack stand is ideal for the 2009 to 2020 models, with a 6000 pounds weight holding capacity and provides clearance of 16.0375 to 17.11 inches.
Their selection depends on the type and curb of the pickup truck. Jack stands have variable designs, and you can select them at affordable prices.
What are the dimensions of jack stands for Silverado 1500?
A 2-ton jack stand is standard for the lightweight and old variants of the Silverado 1500. According to calculations, a 2-ton jack stand has an average maximum height of about 16.6 inches.
However, its minimum height is around 10.65 inches. They are lighter, and the package contains a pair to support both sides of the pickup truck.
Their height varies from 10.6 to 10.15 inches. They have aluminum bodies with stable bottoms.
Moreover, they have a weight-holding capacity of around 4000 pounds. Their saddle base provides stability to the truck frame.
The 1999 variant of the Silverado 1500 has a curb of about 3920 pounds. For these variants, 2-ton jack stands are suitable, which can improve the frame height to 10.65 inches.
Its 2000 to 2003 models have a curb limit of nearly 4670 to 4785 pounds. They are feasible because they require a height of about 10.15 to 10.62 inches from the ground.
But, the 2004 and 2005 Silverado 1500 require a 3-ton jack stand to stabilize the frame at a particular height. These have high-quality compositions and provide safe results.
They have a load-handling capacity of about 6000 pounds. These variants have a curb range of 5110 to 5298 pounds.
Moreover, they provide more stability to heavier trucks. They have different dimensions than the smaller options.
They have a height range of about 12 to 17.15 inches. However, their footprint has a size of about 8×7.1 inches.
They have a specific saddle with a V-shape. But, they fulfill the safety standards and protection from sudden frame falling.
Due to their aluminum frames, they weigh around 4.3 pounds. However, it can lift the frame from the ground with a maximum height of about 16.0375 inches.
Their minimum lifting height is about 11.18 inches. Moreover, they stabilize the frame with a length of 7.75 inches.
Its 2006 to 2008 variants can stabilize on 2-ton jack stands because their curb limits are under their weight-holding capacities.
Furthermore, a 3-ton jack stand is suitable for the 2009 to 2020 Silverado 1500 because their frames require a lift of about 16 inches from the ground.
It slightly varies according to their different curb ranges. For example, its 2021 and 2022 models can use a 2-ton jack stand due to lighter frames.
Why would you use different jack stands for Silverado 1500?
They keep the frames stable when the wheels are above the ground. However, you can use them due to the following reasons.
Weight handling capacity
They have different weight-holding capacities according to their design and stability. For example, you cannot stabilize a 7000-pound pickup truck variant on a 3-ton jack stand because it can break them.
However, they have standard capacities to support the frames of different variants with distinct curb limits. For example, you can adjust a 4000-pound truck on a 3-ton jack because it can handle its load.
But, they have different lifting properties according to their designs, dimensions, and weight-stabilizing characteristics. Before their selection, check the curb of your pickup truck.
You cannot stabilize a heavyweight truck because it puts an excessive load on them. As a result, they can lose their stability and become flat on the ground.
As a result, the frame can fall on the person underneath the truck, which leads to painful injuries.
Durable composition material
They have long-lasting manufacturing material because they handle and stabilize heavy truck frames. In addition, the companies use steel to manufacture durable jack stands.
They have extended lifespans with maximum strength. However, a few are aluminum based, which resists corrosion with improved stability.
These are portable and lightweight, and you can carry them. Steel options are better for heavier pickup trucks.
Aluminum can break under pressure and load. Heat can damage them when you adjust more weight on the aluminum options.
3-ton options are best with a holding limit of around 6000 pounds. During their adjustment, a pair stabilizes under the frame to improve support.
It can leave an additional carriage of about 2000 pounds while holding a 4000 pounds truck.
A frame support for several hours
They are more efficient and can stabilize under trucks for several hours. However, they cannot move automatically due to their adjustment properties.
You can adjust and leave them for more than 2 to 4 days. For months, they stabilize and keep the frame at a specific height.
The ratchet lock style has four legs which provide more stability. The pin lock option has three legs with variable weight holding limits.
Ratchet-style options are heavier and can support heavy trucks. In addition, they have less challenging adjustment procedures and facilitate improved stability with two pairs of legs.
The aluminum-based 2-ton options have a saddle that can adjust on the ground and lift it at a high level. A few products have a top with a rubber composition. Furthermore, it offers more support and grip.
Approved safety standards
OSHA standards are for improved safety of the person underneath the truck frames. Occupational safety and health administration provides a different standard of protection according to the weight of pickup trucks.
The administration never guides about the number of jack stands. It indicates their weight tolerance and stability. Also, it determines the placement of blocks around the wheels to keep them locked.
The brake adjustment includes the safety standards. They have approved safety standards due to their precise performance and stability.
Also, the OSHA does not indicate their types. Therefore, you should assess the design according to the layout of your truck and other specifications.
How to select jack stands for Silverado 1500?
You should consider Silverado 1500 weight before selecting the floor jacks. The older versions are usually lightweight due to fewer amenities.
Their weight holding capacity should match a three-quarters of the truck’s weight. Check the weight of the Silverado variant and select the correct option to reduce the chance of accidents.
According to the required clearance, you can select them. For lowered frames, you require more clearance to move underneath the truck.
You cannot use a short stand because it cannot improve the height. Also, it does not provide enough clearance to assess the bottom side of the truck.