Car jacks are mechanical devices that are used to lift heavy loads. These are of the electric and hydraulic type that you fit under your Toyota Camry to access the undercarriage. These sedans contain specialized mounting points for the installation of these devices.
Where To Put a Car Jack on Toyota Camry? You can put the car jacks behind the front wheel or under the front doors of Toyota Camry. Moreover, you can see mounting points on the front side of the rear wheels and under the rear door hinges. However, you can install larger floor jacks on the front and rear side cross members.
You cannot put the car jacks anywhere on the vehicle’s body because it can lead to damaged parts and safety hazards.
Where are the jacking points located in Toyota Camry?
Several jacking points are located in your Toyota Camry to install car jacks. These points are made of sturdy metal that cannot get damaged and bent during the procedure.
Moreover, these contain welded and bent points for mounting these lifting devices at different locations. These welded points do not contain smooth surfaces to decrease the slipping risk.
These mounting points are present on your cars’ front and rear sides to serve various functions. You can see these designated points on the driver and passenger side.
Welded and bent surfaces are located behind the front wheels and under the front door hinge. You can fit the car jacks in these welded points.
Moreover, you can also put these devices on the front side of the rear wheels located right under the rear side door panels.
Many people use jacks with larger diameters to raise their vehicles for oil changes and inspection of other components.
You cannot use these devices on the mounting points near the front and rear wheels because these are not capable of bearing high force and pressure.
It is suitable to add these on the front and rear cross members. You can install these at the location where the front engine member comes in contact with the car’s exterior body.
It is the exact location where you put your feet while driving.
How do you jack up your Toyota Camry?
It is necessary to lift your Toyota Camry and inspect the undercarriage for any signs of damage, cracks, and corrosion, which can lead to severe issues and costly repairs. It is an easy procedure, but you can also seek help from a professional to prioritize your safety.
Parking at leveled surface
Parking your car at the leveled ground surface for the lifting procedure is essential. Parking at the leveled surface is better to decrease the risk of damage.
Force cannot distribute equally on the exterior frame when you raise your cars while parking on poorly leveled ground surfaces.
The poorly leveled surface can also affect the frame’s structural integrity, warranty, and resale value of your car. Parking on flat surfaces helps maintain stability during these procedures.
It also decreases the risk of rolling, which can cause serious injury during the lifting procedure. I always add wheel chocks on the tires that are not lifted to maintain stability.
Engage parking brake
I always engage the parking brake of my car while raising them using jacking devices to ensure my and my vehicle’s safety.
Parking brakes apply additional braking to the rear side wheels and decrease the chances of unintentional movements. Moreover, the additional security system of the vehicle helps prevent the forward and backward movement of wheels when raised from the ground surface.
It is also beneficial to increase the longevity of the transmission components by reducing the stress on their parts. Locate the parking brake switch in your car according to its model and engage it to ensure safety.
You should disengage the parking brake after completing the procedure and before starting driving.
Take out the jack from the trunk
Car jacks are present in the trunk of the Toyota Camry as an emergency tool. Use the key fob to open the trunk; you can see a black floor mat or trunk liner.
Wear gloves and carefully pull out the trunk liner. Put the trunk liner on the side to fit it again.
You can see the jacks on the right side of the trunk. Jack and its handle are enclosed in a foam sheet for their safety. Take the jacks from the enclosed foam case to change the wheels.
Set jack at designated points
Set the jacks on the welded points under the vehicle and near the front wheels. Add wheel chockers behind the rear side wheels to avoid unintentional movement.
Adjust these lifting devices on these mounted points and crank the handle to increase their height. Crank the handle to achieve the maximum height for wheel replacement.
Adding the jack handles under the vehicle is also necessary to reduce their rolling chances. Replace the tires and then carefully remove the jacks.
Why would you use a car jack in Toyota Camry?
The main purpose of the car jack is to raise the vehicle for inspection and repair of damaged components. You also need these devices while performing scheduled maintenance procedures.
You need these for the replacement of damaged or flat tires. You have to raise your Camry slightly to remove the damaged wheels and install new ones.
You require these tools for wheel rotation and access to the braking components. You need more ground clearance to access the oil drain plug and pan for oil change.
Use larger diameter jacks to lift the vehicle and identify these parts for oil replacement. Exhaust components, including mufflers, are also located under the vehicles.
Moreover, you also need it to inspect suspension, transmission, and drivetrain parts. Several types of fluids are also present in sedans, including transmission, coolant, and differential fluid, and you have to change these for the efficient functioning of respective parts.
It is necessary to increase the ground clearance to change these fluids. Corrosion can also come on undercarriage because of road salts and exposure to road elements.
Slightly raise the undercarriage to apply paint or anti-rust coating on exposed parts to decrease damage.
What happens when you do not put car jacks at jacking points?
It is necessary to locate the jacking points in your Toyota Camry for lifting purposes. You can identify these points by taking information from the manufacturer’s or owner’s manual.
You should avoid putting car jacks on points other than jacking points because these can severely damage your cars and increase your repair cost.
I was sitting in the Toyota dealership with my friend last year for deep washing of my car. I saw the expert, and he mounted the jack on the front and rear sides of the vehicle for a tire inspection.
I saw that these devices came off from the front side welded points because of their poor installation or not using jack stands.
You cannot properly set these devices on smooth exterior surfaces. Welded and bent points are best to hold these mechanical lifting systems.
Your car’s frame and body panels also get damaged when you use incorrect lifting points, which eventually increases the repair cost.
It can also void your car’s warranty, directly decreasing the resale value. Incorrect lifting poses safety risks because these sedans come off from the jacks and cause serious injuries.
Uneven lifting can disturb the balance and cause unequal weight distribution, which increases the swaying issues. Using incorrect mounting points can also affect several components, including steering, transmission, exhaust system, and suspension.
It can also increase the risk of premature wear and tear of these components.
Related Articles: