Skip to Content

Ford F150 Air Conditioning Troubleshooting

Ford F150 Air Conditioning Troubleshooting

Ford F150 Air Conditioning Troubleshooting is all about finding the reasons for an inaccurate performance. 

In general, troubleshoot an Air conditioner on a Ford F150 by turning it on and open the hood. Observe the performance of the AC fan, condenser, and pressure pipes. Next, identify the problems inside the air conditioner. Then, fix them with repairing techniques. 

You cannot leave the system without repairing it. Cleaning and maintenance are essential parts of the repair process.

Ford F150 Air Conditioning Troubleshooting

I have described a stepwise method to troubleshoot the air conditioner of your Ford F150. The help of a technician is suitable to resolve the issues. Repair the problems before they damage the device irreversibly.

Broken wires and electric passage

The broken wires of the air conditioner in a Ford F150 are not a beneficial condition. They disconnect from the connecting joints, and as a result, the AC stops working.

The electric passage also becomes vulnerable. Initially, it sends low voltage for the cooling process.

At the end of such procedures, the device stops working because it does not get enough electric power.

Identify the electric passage and relevant wires in the system. Observe the connecting points and also check the structure of connectors.

Repair them in case of damages by turning off the truck. The replacement of old electric wires and other parts is one of the excellent solutions in such cases.

Glove section issues

The glove box section of a Ford F150 exists on the dashboard. It comprises multiple buttons for the manual control of electric devices.

The buttons can break, and it leads to the non-functioning of the air conditioning device. In addition, the internal wiring of the glove box destroys due to excessive usage.

Heat generates, and it can damage the internal configuration. As a result, it cannot handle the cooling device anymore. As a result, it stops working, and you have to repair this issue instantly.

Open the glove box section and then observe the wires and other connecting points. Replace the old and damaged structures with new devices. In case of severe problems, replace the fuse box and then check the performance of your cooling equipment.

Leakage of evaporator

The evaporator of an air conditioner is the coil for the circulation of hot and cold air.

The coil can hold the electric flow and performs efficiently.

The levels of heat can reach maximum levels in hot weather conditions. This is because the intake of hot air enhances, and the coil can break.

It starts leaking the water, and the system stops working, resulting in excessive heat levels inside the truck. The suffocation level also enhances due to such conditions.

Check the evaporator and cool it with a portable fan.

Off the system for some time and allow its cooling. Cover the open evaporation side to reduce the level of heat.

Repair the broken coil or alter it with a new structure. It starts working instantly after such modifications.

No maintenance

The maintenance of the cooling device is necessary. Ask a licensed professional person to check the errors and performance of your device after every 6 to 13 months.

Negligence can generate multiple problems. First, the air stops flowing, and the inner system degenerates.

The coils can damage, and the dirt can accumulate inside the system. Therefore, cleaning and checking are advisable for these electric devices.

Allow the professional to check the inner parts, and he cleans the machinery and coils.

He may cost your few hundred dollars but repairs the system. It can work instantly with minimal problems.

Broken internal parts

The fan of the air conditioner has blades. They get slow and eventually stops working. Therefore, it is not a suitable condition for a cooling device. You require instant solutions to resolve such issues.

Observe the inner machinery by yourself or ask an expert. Then, change the broken parts and enhance the fan speed.

You can use this device instantly after the alteration and repair procedure. However, the process is time taking, and you have to show patience during such activities.

Damaged AC fuse

The air conditioner of the Ford F150 has a separate fuse. It is present in the central panel of the electric supply.

The fuse can damage due to age and another short circuit issue. It blows out, and the device stops instantly. The system can get excessive heat due to constant working. It also defuses the structure.

Approach the central panel and observe the fuse. The alteration of this equipment with a new tool is essential. If you do not have enough expertise to replace these items, then hire a technician.

Freezing of internal coils

The air coils of the cooling devices suffer from cold air throughout the function.

The coils can freeze due to excessive usage of these structures.

In these conditions, the coils stop working, and the device becomes dysfunctional.

The blockage of inner ducts also leads to the freezing of these coils. The airflow becomes insufficient for all the passengers. The device cannot decrease the hot temperature of the system.

Preventive measures are a solution to such issues. First, clean the ducts and remove all dirt particles. It results in the constant and uninterrupted flow of air.

Faulty thermostat

The thermostat of the system can handle and control the temperature modifications. In few cases, the device fails. It happens in that equipment which is old.

The truck AC turns off abruptly without any remote control event. You have to turn it on after every 5 to 10 minutes.

Observe the working of a thermostat when the cooling device turns off often. Then, purchase a new thermostat and install it in the system.

Adjust the temperature limits and allow the system to handle these fluctuations. Again, these are inexpensive structures and offer an excellent setup.

Inaccurate handling

The handling of the air conditioner in a Ford F150 is a tricky process. When you turn it on and off often, then the system lacks performance.

It can damage the buttons and other control units. As a result, the system becomes powerless in terms of performance.

 The internal environment gets hot and hot with every passing minute.

Handle the system carefully to reduce such problems. Moreover, replace the broken parts and allow cleaning of setup. The results are an accurate performance of the air conditioning device.

Non-functioning motor

Its motor is the electric tool that can pass hot air outside the system. Unfortunately, it damages due to excessive workload. The hot air cannot move out of the system.

The results are severe because the device shuts down suddenly. As a result, it loses electric power for hot air circulation.

Approach the motor of the system and repair the damages. You can also replace this structure with a new device.

Broken AC clutch

The clutch of an air conditioner is the automatic tool for handling the mechanics of the device. It can turn off and on the device with one click. The switch remains attached to the electric connections of the system.

The clutch can break due to improper handling. The system fails and becomes dead after such conditions.

Repairing the broken switch is the only solution to these issues. Replace it with a new tool and change the electric wiring. 

Damaged AC grill

The grill of the AC is a door to pass cold air inside this setup. Unfortunately, it can break due to various problems.

The damages of this particular structure are not beneficial for the standard performance of this equipment. It also sticks in a position due to old age and other such factors.

The door gets locked, and it does not allow the free movement of air and grill. 

Unlock and open the jammed grill of the device. Clean the surface and find the problem.

Repair the locks and discard all damages.

It can move according to the temperature signals of the remote control systems. Effort and expertise are essential to resolve such issues.

What is the method to troubleshoot an Air conditioner in a Ford F150?

Turn on the electric flow of your Ford F150 with the ignition key. Supply power to the air conditioning device in your truck.

Ask a friend to turn it and then leave the structure for idling. You can leave the system for at least 15 to 17 minutes.

It cools the inner air, and you can also estimate the performance of your air cooling device.

Open hood and access radiator

Open the hood of your truck and then access the radiator. It is present near the condensing machine of your AC. The fan is also present on the front side of the radiator.

Check its fan

Observe the function of the AC fan. It must move according to the signals of the control unit.

The inappropriate function of the fan determines that the system lack work efficiency.

Never touch the fan even it is working at a low speed. The fan should work until you leave the system on the idling activity.

Check condensing device

Check the function of the air conditioner in your truck and take the help of a friend during this activity.

Ask him to turn off the AC and turn on the device after 11 to 16 seconds. The sound of a click is an indication of the standard performance of this equipment.

It does not happen, and then the machine is not working appropriately.

Handle and adjust the pressure 

Check the pressure pipelines of your AC on a Ford F150. If they are not cold even after the functioning of your device, then the system is not working accurately.

The hotness of the pipe also determines low levels of pressure. Alteration and repairing are factors in these situations.

Related Articles:

How to plow snow with a Ford F150 truck?

How much does it cost Ford to make F150?

How do you install the new leveling kit on a Ford F150?

Ford F150 Multiple Cylinder Misfire