Breakaway cables can directly connect with the brake system of the trailer. You can attach the towing vehicle and the trailer with these cables.
They provide an instant brake system to stop the trailer. It usually occurs when both structures lose the attachment points.
How to Attach a Breakaway Cable to a Trailer? Attach a breakaway cable to a trailer with efficient tools and accurate locations. Adjust the breakaway cable with different clips and make loops of the cable. These cables have attachment capability with the tow ball tools. Adjust every point of connection with specific guidelines.
The brake system becomes active during such conditions, and it ultimately reaches to stop the massive vehicle.
It is a beneficial cable system for the control and protection of structures. There are minimum chances of any harm in the presence of these cables.
The structures of these cables are like any other cable of connections. They have external insulation to prevent environmental hazards.
How to Attach a Breakaway Cable to a Trailer?
Multiple spots allow the attachment of breakaway cable on the trailer. All of these spots are powerful enough to control the attachment patterns of such cables.
These are specific for such connections and can handle massive changes. They have weight tolerance capabilities and are easier for them.
Tool required
- Hooks
- Clips
- Drill machine
- Non-permanent marker
Access its location
Access the accurate location on the trailer to attach this cable firmly. The manufactures make a loop hook for the crossing of these cables.
Observe the trailer and find out these spots for the comprehension of the mechanism.
The spot depends on the owner or the person who installs such cables in the trailer. You can also install these cables in the tow ball section.
Cross the cable
In this step, adjust the cable with the trailer in an accurate position. You can cross this cable in the hook with a middle hole. It is an easy and less time-consuming process.
The connection builds up between both massive structures instantly. It is a secure connection with minimum chances of errors.
In those trailers, that does not comprise the built-in hooks and then use another technique. Cross the breakaway cable across the tow ball section and then install a steel hook.
Make holes with a drill machine near the tow ball section. You can also generate openings where they are usually present.
Attach it with the hook and connect with the trailer. It is a time-consuming process, but it offers security.
The only error, in this case, is human negligence. Always take professional guidelines before performing such procedures.
Attach with clips
Attach the clips to this cable and they work as security tools. The kit comprises these clips, and they are an essential part of procedures.
The plastic clips get activated during the unhitched situations of the trailer. They prevent harmful conditions like serious accidents.
Connect with the trailer
Connect the end of the cable with the trailer. It is the second last step of the process, but it starts working efficiently.
What are the Spots to attach the breakaway cable on a trailer?
Here are the suitable places to attach the breakaway cable to your travel trailer.
Attach with the Hook
A hook is an attachment point on the trailer for the attachment of a brake system cable. These hooks are built-in structures, and manufacturers make them for such connections.
You can easily access these hooks on the front side of the trailer. They are small but efficient tools for such attachments.
The steel hooks have weight-bearing capacities, and they remain firm in one position. They have enough space to acquire a cable in the middle portion.
They make the installation process casual than ever, and it is less time-consuming with the help of hooks.
They are of steel material and free from corrosive properties. You can attach both massive structures with these small hooks.
Use the tow ball section
The tow ball section is like a high tool that is in the upward direction.
The manufacturers offer these points for connecting such quick and efficient devices with them. You require specific expertise to generate such connections.
Attach with an accessory
An accessory can be an efficient way to attach the breakaway cable to the RV. It can be a hook or other loop materials, and they offer better control.
You can install the steel hooks in those trailers that do not comprise it in their structures.
The design of the trailer lacks such features, and manufacturers never add them. Use Rear bumper
Take measurements of the cable and its surrounding before making holes. Mark the spots with the non-permanent marker.
Use a drill machine and make a hole in this compartment, and move the cable through this hole and make a loop.
It is a bit time-consuming process, but the spot is excellent in terms of security. Use a bolt in this hole to fix it and it is a secure process.
Under the carrying compartment
It is a spot under the carrying compartment and requires few modifications. The frame or the body of this camper allows making holes.
Mark a spot with a non-permanent marker. Use a drill machine to generate such holes. Cross the cable through the hole and make a loop for proper control.
Add a bolt in the frame around the opening to secure it properly. It never leaves any extra space in the surroundings, and people prefer this method.
Things to consider when attaching a breakaway cable to your trailer
There are few things you need to consider while installing these cables.
Length of the breakaway cable
Always consider the length of the breakaway cable before using them.
The shorter length of cables can lead to improper connections and other disasters.
Disconnection from handbrake
Make sure that its connection does not comprise the attachment of the handbrake.
It should never pull the hand brake of the trailer. It can lead to deadly conditions and deadly accidents.
Why would you attach the breakaway cable to a trailer?
People use breakaway cables on their trailers for various purposes. A few of the advantages are a quick brake system, safety on the road, and legal requirements.
Quick brake system
It is directly in connection with the brake system of the vehicle. A small push or slight signals are beneficial to control such layouts.
They are instant in terms of their movements, and they also maintain towing structures.
These are small tools with maximum power to restrict the movement of RVs. They are central connecting points between the campers and the towing vehicles. You can stop both of them together in case of emergencies.
Safety on the road
It prevents the free movement of the towing vehicle on random roads.
It leads to harmful and deadly accidents, and you should avoid this condition. The unhitching of both structures leads to proper separation, and the towing vehicles lose all of their control.
They stop the towing vehicle in one place by activating the brake system of such structures. They are safety tools for the owners and all other people on the roads.
Is a breakaway cable a legal requirement?
It is a legal requirement to attach a breakaway cable in all RVs and structures like trailers.
They must acquire the weight tolerance capacities up to proper limits. The standard criteria in terms of weight are from 740 kg to 3400 kg.
You cannot hitch a towing vehicle with the trailer without these capacities.
The legal authorities are strict about such installations of small devices. Every owner of a trailer has to follow the policies and rules.
Related Articles:
How much does an RV depreciate per year?
Where to place plants in your RV?