Here are easy methods to make speakers louder in your Toyota Tundra. Many people prefer to enjoy music at high volume while driving the truck.
How to make the Toyota tundra speaker louder? You can make the Toyota Tundra speakers louder by correcting the polarity, tuning the control system, sealing the sides of the speakers, and using high-quality stereo speakers. In addition, you can also add subwoofers, use sound dampening, amplifiers and add capacitors to make its sound system loud.
- 1 Add more speakers in Toyota Tundra
- 2 Properly connect speakers with the battery
- 3 Sealing
- 4 Tuning control
- 5 Interior material
- 6 Clean the sound system
- 7 Add Subwoofers
- 8 Amplifiers and Bluetooth settings
- 9 Repair and replace old speakers
- 10 Asphalt sheets and equalizers
- 11 Close the doors and windows
- 12 Internal wires
- 13 Turn off the volume of cell phone
- 14 Add tweeter and capacitors
- 15 High-quality speakers
- 16 Update its software
Add more speakers in Toyota Tundra
Generally, it has speakers at the doors, dashboard, and backside of the rear seats. These are the common places where every vehicle has a sound system.
You can make the truck’s sound system louder by installing the additional speaker at different places. In addition, the rear seats of this truck are large and more comfortable than the others.
You can also add the small size speakers at the upper side of the arms rest and beside the backrest.
The most exciting and interesting thing is that you can add the large size speaker at the backside of your truck under the toolbox at the cargo bed.
You can enjoy the music when you celebrate a birthday and anniversary event at the beach. Turn on the music and open the doors of the truck and make the volume higher.
The sound coming from these gathers makes it louder if you install good speakers. You can also cover them to protect them from the rain so that the moisture will not go inside and damage the wires.
You can buy a plastic sheet like a wind deflector, but it should be straight and 2 inches wider.
There is also ample cargo space at the rear of the back seats.
The best option is the addition of a speaker at the backside of the rear seats.
This truck has ample space at the side of the driver seat and front passenger seat. Furthermore, you can also set the additional gadgets near your ear to listen to a higher volume.
Properly connect speakers with the battery
The professional can connect the speaker with the battery to work efficiently. Sometimes there can be a problem with a connection that makes it lower and Tundra speakers will not work.
You should check the polarity of the wires and battery sockets. Connect the positive wire with the positive end and the negative wire with the negative end.
Close the system that you have opened for this purpose and turn on the speaker. You will hear the significant difference in the volume.
Sometimes the mechanic connects the wires with the battery in the wrong way in a hurry. Always check the connection with the battery if these are not working correctly.
Apply sealer around the speakers, windows, and doors to make it louder. The dust particles and air will go inside the system to reduce the volume.
Mostly these are present in round shape in a vehicle at a specific position.
Apply the adhesive material at the edges of the frame, or you can apply it to the sealer. Place the sealer at the bottom and wait for a few minutes.
Furthermore, set it in its suitable place and tighten the nuts again.
You can make it louder by tuning the control system. Sometimes the children sitting in the Toyota Tundra at the front passenger seat press the buttons and touch the screen unintentionally.
It will make changes in the control system and also in the sound system. So you should check the setting and set it to default, or you can also do it according to your will.
It is better to choose the mid-bass as it cannot distort the sound quality. You can also make it at a higher level but under specific circumstances.
Close the doors and windows of the truck while you are setting the bass.
The professionals mention that the interior material also absorbs sound but not every type. You can eliminate this issue by placing the soundproof mates at the foot sides.
Do not use the material that absorbs the sound on the upholstery and seat covers. For example, Hushmat and Dynamat are sound-deadening materials that absorb noise and vibration.
Clean the sound system
When you hear the distortion while enjoying the music in the vehicle, you should clean the speaker. It is better to separate the upper cover from the interior and wash it with a soft bristle brush.
Put the soft sponge in the solution of water and detergent. Apply this solution on the dust cap and wash with clean water.
Dry it immediately with a hairdryer or place it under the fan. It will remove the dust particles that lower the volume.
Many people clean without taking it off through a blow dryer. However, this process has a disadvantage as it blows the dust particles in the vehicle and makes the interior bad.
You can choose the subwoofers with higher volume and place them in all the speakers or specific stereo sound systems.
Amplifiers and Bluetooth settings
There are two types of amplifiers such as active amplifiers and passive amplifiers. The speakers that have a built-in amplifier in their system are operational amplifiers.
The new and updated version comes with a Bluetooth connection. You should check it and increase the volume. Do not exceed the higher limit because it can cause damage.
The Bluetooth system has built-in special connection wires. These catch the signals and run with the music.
Repair and replace old speakers
You should replace the broken and damaged speaker with a new one to improve the sound quality. You can also repair the damaged part by repairing the wire connection and applying the sealer.
Many professionals recommend changing the old ones after two to three years. After this time, the sound quality lowers and causes pause during traveling.
Asphalt sheets and equalizers
The manufacturer made this sheet to improve the sound quality of speakers in the vehicles. However, the asphalt sheets do not absorb sound waves, and you will hear loud music.
You can replace the other things and mates with the asphalt sheet if you feel that the sound system is not working correctly.
It is better to use equalizers in the interior of the truck. The glass material reflects the sound waves while the carpets absorb them. It is better to install a balance to maintain the sound quality.
Close the doors and windows
You should close the doors and windows properly if you want to enjoy the loud music in your Toyota Tundra.
This vehicle is large, and the sound waves have to travel a long distance to reach the person’s ear. In addition, the closed doors will not allow the music to go outside.
You should change the internal wires of the speaker if it is damaged. Sometimes the seller uses lower quality wires to connect it with the vehicle software.
The outer cover of the wires melts and starts damaging the internal part. You should replace it with new and high-quality wires for better quality.
Turn off the volume of cell phone
Many people connect their cell phones with the sound system of a vehicle through cable or Bluetooth. You should turn off the absolute volume of the cell phone to decrease the rattling sound.
You can lower or higher the music using the volume keys of mobile. You can also control the bass and pitch of the sound with the help of a mobile phone setting.
The company made high-quality cell phones with new and updated features that will provide comfort convenience during long driving in a vehicle.
Add tweeter and capacitors
The tweeters are the high-frequency gadget that makes it louder. The tweeters are more reliable than the subwoofers that have a low frequency.
The addition of the tweeters is the best thing to reduce the distortion while listening to music. Sometimes it may cause a disturbance, so you have to change and repair it.
If you feel any resistance, then you can add capacitors. The manufacturer made the capacitors significantly to reduce the resistance.
The capacitors have an advantage over the other method because they cannot damage it even if you higher the volume.
You should replace and repair the old one if these are creating some problems. Always prefer high-quality products in your truck.
It is an expensive and stunning vehicle, so the accessories should be high quality. Check these properly while you buy them from the market. You can also claim it if you bought it from an online store.
Update its software
The built-in speakers are connected with the Toyota Tundra software. Therefore, you should check the software before starting further procedures.
Press the screen and go into the software option. There will be an alert for software updates; you should press the button and wait until the software updates.