Skip to Content

Why is Ford F150 Ecoboost Vacuum Pump Leaking Oil?

Why is Ford F150 Ecoboost Vacuum Pump Leaking Oil?

The Ford F150 EcoBoost vacuum pump is vulnerable to damages. Many people complain that the pump starts leaking frequently.

Why is Ford F150 Ecoboost Vacuum Pump Leaking Oil? In general, the Ford F150 EcoBoost vacuum pump starts leaking oil due to inaccurate design and no covering. It also leaks due to loose-fitting of the vacuum pump, broken gasket, lack of maintenance, and overheating. 

They remove the toxic material from the power brake sections, and they are present behind the driver’s seat. In addition, they have housing of headlamps in this compartment. 

Why is Ford F150 Ecoboost Vacuum Pump Leaking Oil?

If your Ford F150 vacuum pump is leaking, then below are the possible reasons. I have also mentioned the repair and control steps for these problems. 

No covering

They have coverings that are known as power terrain covers. However, in few designs, the system lacks covers. 

In few circumstances, the cover breakdown and leads to oil leaking. However, the problem gets severe when the oil starts accumulating in the system. 

The continuous overflow of the oil is not suitable. It can harm the other structures in the surrounding.

The arrangement of a power terrain cover is one of the best solutions for such leaking problems.

Cover the vacuum pump in the truck. It resolves the leaking problems and keeps the system safe.

Inappropriate design

The inappropriate design of the vacuum pump on the Ford f150 leads to oil leaking. In addition, the system can lack few parts in the whole structure. 

Initially, the system seems fine, but the adjustment problems notify about the future errors.

The pump can lack few pipes of connecting joints. Therefore, it generates the leaking issues of oil from this device. 

The electrical system fails, and as a result, the hoses stop work, and the oil flows outwards. 

It fails to operate accurately, and the leakage proceeds. 

The replacement of such inaccurate equipment with a new device is one of the best solutions.

Broken seals

It is made of various seals. These seals are suitable to keep the system intact in one particular position. 

In few situations, the tearing of the seals occurs. It happens due to sudden bumping on the seals. 

The cracking and damages occur, and these tools tear apart. In addition, the broken sealing sections are not suitable for high-quality performance.

The system leaks oil, and it accumulates in the surrounding. The efficiency of the system also declines due to such effects.

The replacement of these broken seals is a remedy for such errors. 

No maintenance of vacuum pump

It requires maintenance and control to perform adequately. In few situations, the user does not bring the vacuum to the mechanic shops.

The low maintenance routine of these devices makes them vulnerable to damages. As a result, its parts crack and, damage occurs in the electric system.

The vulnerably enhances it leads to oil penetration out of the system. The problem gets severe when the oil flows into the surrounding devices. 


The continuous use of this device can produce a high level of heat inside the system. 

It results in the formation of heat in the electric wires. They burn due to these high-temperature conditions.

If you leave the system without fixation, then problems occur. 

The hoses and electric system become inappropriate in terms of performance.

Maintain the heat conditions in the power brake system. Add a cooling machine near such a hot device to reduce oil leakage.

Inaccurate fitting

The inaccurate fitting conditions can lead to various errors. 

The bolts fall on the floor without any notification. The open valves and other areas allow the movement of oil outside.

The leakage occurs in the form of droplets. The lubrication of the half-open screws leads to their removal. The oil flows out from this section.

Use high-quality and efficient tools. Fix all the nuts and bolts in this device. Check the leakage and remove all types of errors. 

Gasket issues

The gaskets are a necessary part of the vacuum pump in a truck. They have an accurate design with openings for the supporting tools. 

The non-adjustment of the gasket or broken parts leads to various problems. In addition, the damages lead to severe issues like leakage of oil in a Ford F150 Ecoboost.

The broken gaskets are not suitable for the system because they reduce the efficiency of the brake system.

Identify the problem and replace the gasket in the pump. Tighten the bolts and other non-adjusted parts. 

Use high-quality tools for these problems and secure the system. In this way, you can instantly remove the oil leakage problems.

Inaccurate pipe adjustment

It contains pipes for the control of oil. The pressure-generated oil passage requires maintenance.

The control of such structures is necessary to prevent various problems. For example, in few cases, the pipe of the device breaks. 

It happens due to sudden accidental situations, and cracks occur. In few designs, the age of the pipe affects their quality and performance. 

Identify and observe the pipes inside the device. Then, replace the damaged passage or repair them with various fixation techniques. 

High pressure inside the device

The function of this device is to produce suction and high pressure. The pressure is necessary for the excellent performance of the brakes. 

In few circumstances, the pressure exceeds the standard limits. The high levels of suction are also not suitable for these systems. They can break the design due to the continuous buildup of the pressure.

The bursting of the inner equipment and pipelines occurs without any noise. However, it results in oil leakage problems and requires instant repair.

Observe and control its suction pressure, then, repair the broken parts to atop the overflow of oil from the device.

Corrosion on Vacuum Pump

The brakes work with the coordination of the device and its pressure. Therefore, the usage depends on the road conditions and environmental effects. 

Its constant use can cause corrosion on the surface and make the system vulnerable.

The non-cleaning conditions of this contaminated device lead to the breakage of the bolts. The device also cracks due to corrosion on the surface. 

The system cracks and the oil flows out from the device. It requires an immediate fixation to stop the overflow of oil.

Clean its surface during the maintenance session. Prevent it from the accumulation of dust because it can interact with droplets of oil. 

Broken mist separator

In few designs, it comprises a mist separator. However, the breakage of these tools leads to oil leakage that is not a suitable condition.

Identify the broken mister and repair it. Replace the device if the damages are irreparable. Stop the oil leakage from the vacuum pump.

Related Articles:

How to replace the crankshaft position sensor on a Ford F150?

How do you replace the Ford F150 cabin air filter?

What is the Ford F150 back window size?

How to reset the compass on a Ford F150?