Skip to Content

How to Get Dried Poop Out of RV Tank?

How to Get Dried Poop Out of RV Tank?

Get dried poop out of the RV tank with multiple beneficial techniques. Take the help of an expert and follow the instructions. Use high-quality cleaning agents with bacterial and enzymatic activities. 

How to Get Dried Poop Out of RV Tank? In general, you can get the dried poop out of an RV tank by softening it through a cleaning agent. First, make holes in it with a rod and add fresh water, allow it to flow towards the tank valve, and then discard it. Next, dump the poop tank by flipping it in a dumping station, rinse it with fresh water and reinstall connections. 

Removal of dried waste material is challenging. First, turn it into a semi-solid condition with water and other liquid. Then, spend time for the softening of rigid and dried wastage. 

How to Get Dried Poop Out of RV Tank?

I have added 7 easy steps to remove the dried poop out of an RV tank. The removal of dried waste material is challenging. Utilize the following techniques and dump them at a particular spot.

Dried poop is the waste material of the RV toilet. It adds solid and liquid waste and retains it in the tank. When the user leaves it for longer times without discarding it turns into a dried material. 

Access the poop tank

The poop tank is a container that collects the wastage of toilets. It adds liquid and solid waste material. 

The capacity of this particular tank is according to the size of an RV. The number of passengers also defines the dimensions of such containers.

The poop tank is usually on the backside of an RV. It is present with other wastage containers. 

The connection of this tank is direct with the toilet seat. Approach the container and then observe the amount of wastage.

Open/close the valve

Open the back valve and pour some water on the material. If you see a passage of water flow through this area, then it is a good sign.

The water cannot flow out of the tank due to the clogging of poop on the valves. Therefore, they cannot move the wastage material directly outside. Close the valve to secure the messy situations. 

Add tank cleaning agent

Take an excellent cleaning agent and purchase at least 2 to 3 bottles. Then, add 1-2 liters of cleaning agent in the toilet seat bowl and press the flush button.

It cannot remove the clogging of stuck wastage material. Add more cleaning agents after every 30 to 40 minutes. 

The composition of cleaning agents can remove the dense layers of waste matter. The liquid makes a hole for the transfer of waste inside the tank. 

You cannot directly dump a poop tank in the dumping station. They are clogged tank conditions, and you have to change them in a semi-solid situation. 

The cleaning agent can take around 70 to 80 hours to demolish the rigid layering. 

Add water inside the toilet seat

Add water inside the toilet seat, and it rushes to the poop tank. You cannot add water directly to these smelly and pathetic containers.

The smell is intolerable, and you cannot stand near them for these direct activities. In case of holes, you can add 1 to 2 gallons of water after every 30 to 35 minutes.

Repeat this process until you demolish the top side layers of the waste material. The water flows to the tank that can hold gallons of water. Add the cleaning agent with water for excellent results. 

Close its valve

In a few situations, the cleaning agent cannot perform the task appropriately. First, the waste material dries and gets rigid.

Second, you cannot soften it through the water even if you add multiple gallons of freshwater in the poop tank. 

In such cases, close the backside valve of the tank. It holds the wastewater inside the container for several hours. 

Leave it for softening if you have extra time. In other circumstances, utilize techniques to discard the wastage material from the container. 

Utilize toilet rods/pipes

The long pipes of excellent quality make holes in the clogged waste material. You can purchase them from the toilet stores at moderate costs. 

Adjust the rod on the clogging and then strike it. Maintain the level of strength and never harm the toilet seat. Make holes by disconnecting the addition of water. 

It results in a clean and secure waste hole-making procedure. Then, allow the flow of water and cleaning agents from these holes to the tank.

Repeat the process until you unclogged the above layers. Dig deep holes so that the water directly flows towards the poop container. It can moisten the dried material in the wastage tank. 

Break layers

Break layers of poop pyramid in RV black tank through their insertion. You can penetrate deep down the layers of waste material. 

The rods are sufficient to hold the resistance of such material. Keep adding the cleaner at these points.

The bacterial effect of the cleaning agent can decline the layering efficiently than any other process. Break multiple layers and collect the waste in the relevant poop tank, and it will make your RV toilet smell better.

Add water through the passage

Add plenty of water in the tank through gallons. Then, keep adding it until you see it flowing on the top layers. 

The passage of holes is sufficient for the flow of water towards the tank. However, it mixes with the waste matter and softens it to excessive limits. 

Select a dump station

Select a dump station for the removal of waste material. These are specific places for the destruction of tank material.

You can select a spot according to the amount of weight of your RV poop tank. 

Open backside tank valve

Open the backside valve of the container. Allow the flow of waste material in the semi-solid condition. 

You can also flip the tank with the help of 2 to 3 people. Consider this step when there is a minor level of waste material leaves inside the tank. 

You cannot handle this structure. It can result in various harmful conditions. The removal of waste from the tank takes around 30 to 45 minutes. 

It also depends on the level of waste material. If it does not support the removal, then directly dump the tank in the dumping station. Close the backside valve of this structure and then follow secure dumping.

Empty the poop tank

Empty it to reduce the levels of inner waste matter. Then, spend time at the dump station and utilize suitable techniques at these spots.

You can demolish those layers that restrict the emptying of the containers. Keep the cleaning agents, rods, and freshwater gallons with you throughout the process. 

Wash tank

Use pressure pipes to wash these containers. Rinsing is one of the best options before adding any other cleaning agent.

Rinse the poop rank for at least 40 to 50 minutes. You can also add cleaners and soaps for the design of such tanks.

They get heavier after cleaning conditions. Allow them to dry naturally for the removal of harmful smells. 

How to identify dried poop in the RV tank?

It is a method to identify that the poop has dried in an RV tank, and you have to take measures.

Access its valve

The poop tank has a valve on one side. First, access it to check the clogging. Then, open it from outside and watch the disposal of waste material.

If nothing flows out, it means the material has dried. It also blocks the valve and passage of external removal of waste matter. 

Push the flush button

Push the flush button of the toilet seat to see the flow of water.

If it does not move through the pipelines to the container, and it means the poop has dried. 

Add water according to the situation

Add fresh water to the toilet seat to see the channeling. If it goes down and moves outside the back valve, then the system is functioning. 

Check internal valves

Check the internal valves and connection of the toilet and container. The waste material does not discard in a manner. It shows the dryness of wastage stuff. 

Related Articles:

How do you make your own RV dump station?

Can I install a towel rack in my RV?

Can I dump RV antifreeze on the ground?