Using recommended tire pressure on a Toyota Highlander increases the life of the tires. Tires are the essential part of every vehicle for smooth and comfortable driving on the road.
What is Toyota Highlander Tire Pressure? The tire pressure of the Toyota Highlander ranges between 30 to 38 psi in its different models. Sensors are present in the wheel that transfer signals through the valve stem, and appear the sign will appear on the monitoring screen. You should slightly inflate more air in them during winters and when driving on sandy roads. On average, the tire pressure on a Toyota Highlander is 36 psi.
The Pressure monitoring system also needs to be reset after some time for proper calibration and correct signaling.
The proper inflation also increases the safety of other parts while preventing them from accidents. It will also keep their tread surface from wear and tear and also reduce the repairing cost. You should check the air in them according to seasonal variation.
Tire pressure of Toyota Highlander
The air pressure of tires is essential for comfortable driving and improving their longevity. However, the pressure may differ according to weather condition, trims level, size of wheels, and according to their model.
Different models of this SUV have various inflation capacities according to their quality. The approximate tire pressure in the models of the year 2005 to 2013 is about 28 to 33 psi.
In generations of the year 2014 to 2022, it is about 30 to 38 psi. So the recommended one for front and rear sides is about 36 to 38 psi which is safe during driving and prevents damages.
When traveling in sandy or beech areas, you should have to inflate your wheels a little less. For example, if the standard inflation is 36 psi, you can fill them for about 34 psi.
It is necessary to decrease the value from the standard because it will produce more friction on the sandy roads and provide a smooth drive.
When fully inflating the wheels and driving them on beech, it will make the driving impossible and increase the slipperiness due to less friction between tread surface and road.
Air monitoring is also necessary; before driving, you should check the air on both the rear and front sides.
The cold weather cause decrease in the air due to the fluctuation of temperature. You should inflate your tire 2 to 3 psi more than the standard value.
It is necessary to check them whenever you are going for a long drive because it will improve your gas mileage and braking distance. You should also know the weight of the Toyota Highlander for better results.
Improvement of braking distance at high speed is essential for vehicle, driver, and passenger safety. When you purchase a new SUV, its standard pressure is present on the driver’s door side; if it is not present, inflate them from 30 to 35 psi, and it is safe.
How can you monitor the tire pressure on Toyota Highlander?
You do not need to place a particular gadget in your SUV to monitor the air pressure in the front and rear wheels. Instead, the unique monitoring system on the dashboard will show signals during fluctuations in the air.
When these become less inflated, the warning sign will appear on the dash of Toyota highlander. The warning sign is a yellow color exclamation mark with brackets signs on their sides.
When the problem occurs in inflation of one or more tires, and their air reduces from 10% to 20%, it will show signals due to this monitoring system.
When the monitoring system senses excessive lowering of tire pressure, it will continuously show a low wheel pressure icon on the multi-information display system.
For appropriate monitoring, the sensor is present in your wheels, and you should take proper care when changing or replacing them.
These sensors are connected with the valve stem of the rim by using hex head nuts. These sensors provide the signals if any problem and fluctuations come in the system.
You can also use a skillful method to recognize that the wheels are properly inflated or not. Press their surface if these are easily moving inward while pressing, and you will make them feel soft and squishy. Then fill them with air according to its limit.
What happens due to fluctuations in tire pressure?
The fluctuations of the air pressure of wheels can cause serious damage. It will produce the passenger and driver life at risk and reduce the longevity of wheels.
Tire pressure of more than 40 psi in Toyota Highlander causes irreversible and nonreplicable damage to wheels and their tread surface.
When you are driving with heavy loads on your vehicle, and your wheels are overinflated, it will disturb the stability, control and also increase the risk of accidents.
Moreover, the overinflated ones can easily burst on highways and hilly roads due to less surface friction on roads.
Increased tire pressure is also a big hindrance to a smooth and comfortable drive, and it will also transfer more noise from the road towards the cabin of your vehicle.
It will also cause bumpy drive on unsmooth rode due to harder sidewalls. The surface of tires becomes hard due to inflation, and these are more prone to damages when hurdles from roads come in contact with them.
The excessive air pressure in wheels also increases the bounciness and swaying, which is a very uncomfortable situation during driving.
It also compromises safety because it will reduce the stopping distance. In addition to this, when wheels accidentally blow out, then it will cause serious accidents.
When you are finding excessive air in wheels, then, first of all, locate the valve stem and slightly push down the metal pin present in them to release some air from it.
Monitor the required air using a pressure gauge, and after this, screw the cap back to its original position.
The underinflated wheels need more effort to drive them on the road, and in this way, it will lessen the speed.
It will also compromise the fuel or gas economy by reducing their mileage capacity. It will also increase the risk of hydroplaning due to less friction of tread surface with the road.
It will also reduce the longevity of rims because underinflated ones will bend easily and pose more pressure on rims and also bend them.
When one or more wheels pressure is down, the vehicle’s stability gets disturbed from this side, and these are moving downward from the affected side and posing more force on the rims of that side.
You must check the tire by using a pressure gauge for your safety when going for a long drive.
When tires are inflated, the side walls also become loose, and the jerky movements also cause loosening of contact in their tread surface.
Due to low pressure, you can’t drive your vehicle on snowy or icy roads. In addition, it will increase the slipperiness due to improper inflation.
Due to changes in its shape and structure, it will also disturb the control of the Toyota Highlander steering wheel and which will directly increase the risk of accidents.
It will disturb the steering angle, and you are feeling difficulty while turning them in different directions.
How do you reset the tire pressure monitoring system on Toyota Highlander?
Sometimes the air monitoring system is also showing wrong signals due to poor calibration. The warning light still turns ON while you have checked the air in tires.
In this condition, you have to reset the system for proper reading and signaling. The TPMS resetting button is present on the lower side of the steering wheel.
When you are parking your vehicle after driving and start them again, it will automatically reset the TPMS.
When calibrating this system, you first have to drive them some miles at mpg of 25mpg to 35 mpg for 13 to 15 minutes.
After this, turn on your SUV but keep in mind that it doesn’t start; just keep it in ON position. After this, hold the TPMS reset button on the steering side for some time until the warning light will blink for three times. Then, release the button and wait for 15 to 20 minutes to properly refresh the system and sensors.
After this disconnect, the battery turns on the horn and vehicle to release the remaining power.
Then inflate the Toyota Highlander tires for about 3 to 4 psi more than their standard value and completely deflate them.
After this, re-inflate them properly and check all the preventive measures.
Related Articles:
What’s the gross weight and curb weight of the Chevrolet Suburban 2500?
How many maximum miles can you drive a Subaru Forester on empty?
How Much Does a Nissan Rogue Weigh?
What’s the towing capacity of the Toyota 4Runner?
Will Chevy Rims Fit a Toyota 4Runner?