Skip to Content

Why is my Ford F-150 Seat Heater Not Working?

Why is my Ford F-150 Seat Heater Not Working?

If your Ford F-150 seat heater is not working, you should find the main reason for this problem. 

Why is my Ford F-150 Seat Heater Not Working? A Ford F-150 seat heater does not work due to electrical and mechanical issues. The improper wiring system, damage electric power sources, faulty remote system, broken fuse, and manufacturing faults stop the seat heater from working accurately. 

Why is my Ford F-150 Seat Heater Not Working?

The seat’s heater in a Ford F-150 is a luxury to keep the seats warm in cold weather conditions. It is a heating device that is present under the seating area of the truck. There are numerous heat elements and electric channels that control the heating mechanism.

Multiple reasons stop the seat’s heater from their casual working. The causes are Unplug wires, improper power supply to the heater, fuse issues, manufacturing issues, worse heating element, thermistor problem, Faulty remote systems, burnt device, broken wires.

Detached wires

The heating systems of seats in an F-150 utilize electrical energy. This setup requires a proper channel of electrical signals to keep the seats warm in cold weather conditions.

The electrical wiring is fragile in such a mechanism. They can detach from their point of orientation with a sudden jerk.

The sudden shock pulls the electric cable so intensely that it tears apart. The starting end of the electric wires break, and it loses its power connection.

These electric tools are enabling to supply of signals to devices like seat heaters. The electricity breaks, and the seat’s heater also stop. Inappropriate heat supplies lead to cold conditions.

Check the electric panel and identify the problem. Resolve it by using an electric cable connector. In case the electric panels are not in better condition, then replace them with new electrical cables. When you repair the electric systems, then the seat heater starts working without any hurdle. 

Improper power supply to the heater

The improper supply of electrical energy to all parts of the seat’s heater is essential. Sometimes the system fails to offer left and right side current in a proper passage.

The ways of electrical energies combine. The mixing of electrical lines causes undifferentiated signals.

The seat heat cannot absorb such mixed signals. They have to put a lot of effort into their casual performance.

The seat heater tries to maintain the internal temperature for some time, but constant mixing of signals leads to disaster. The heater stops working, and the truck cannot cope with cold temperature conditions.

Observe and check the particular issue. Separate the electrical sources from each other. Maintain a specific distance to prevent the intermingling of the power directions. You can replace the tool that causes the issue in most cases. 

Fuse issues

The inappropriate function of the electrical fuse is one of the biggest reasons for an improper seat heater, the fuse lies in the electric panel.

The faulty fuse leads to the inaccurate performance of the seat heater. Sometimes the fuse has blown out due to specific reasons.

These fuses cannot work efficiently, and the power supply becomes miserable. The heater of the Ford F-150 seats gets maximum heating energy from the proper fuse system. 

Observe the performance of the fuse immediately when the seat heater stops working. Replace the blown-out fuse because it is one of the best solutions to this particular issue. 

Manufacturing issues in the seat heater

There are some manufacturing issues by the owners of companies. The model F-150 lacks the proper plugs, and there are chances of moisture accumulation.

It leads to rusting and corrosion of the electric plugs, and the heat supply becomes miserable. 

They supply 10-12 volts of energy every time for the proper functionality of a heater. Sometimes the plug fails, and as a result, the seat heater cools down.

Check the plug area and remove all the dirt and moisture. Use an air compression machine to remove the water from the surface. Replacement of the plug is also an option when it is completely damaged. 

Bad heating element

The problems that lie inside the seat heater are one of the most common issues. The electrical wires inside the seat heater are fragile and vulnerable.

They break due to a small shock, and it is an uninviting event. The breakdown occurs inside the circuit of the heating element.

The burning leads to the breaking of electric cables and even the fabric of seats. It is a deadly happening because sometimes it harms the passengers. The heater loses all of its power to work accurately.

Replacement of the broken and burnt wire of the heating element is one of the best solutions for such problems. Cover the heating element with tape and threads. It helps in maximum protection from shock and breakage.

Thermistors sensor problems

The thermistor of the seat’s heater is a sensor of temperature conditions. It has a specific location in the entire system. The thermistor dislocates due to any shaking of the truck, which causes the heater’s dysfunctionality. 

The dislocation of the device leads to the burning of an electric cable of the seat heater. 

Moving the thermistor back to its location is one of the best solutions. You can replace the burnt electric cables with new ones. It immediately supplies signals to the seat heater, and it starts working. 

Faulty remote system

Few seat heaters rely on remotes and buttons. Sometimes the device breaks, and the seat heater cannot get enough power supply. The sudden break in the system occurs, and it is unfavorable in the cold weather conditions. 

The internal temperature increase due to cold environmental conditions. In case you find that the fuse, plugs, and other electric systems are working accurately, check the remote.

These remotes have small batteries or charging cells. When the cells lose their capacity to work, then the remote fails to send signals. The heating device does not start even when you press the device buttons. 

Check the remote and installation date of the cells. Replace the old cells with new ones and make the system compatible once again. In those situations, when the tool breaks, then replacement is the only solution. 

Burnt device or Broken wires

In those situations, when the electrical wires burn or the heating device breaks, the system stops working. It requires a precise network of electricity and signals for producing enough amount of heat.

The heating mechanism becomes slow when one electric cable burns or breaks. In the circumstances, when the heater breaks, then there are no chances of performance.

Replace all the burnt and broken wires, change the broken heater with a brand new instrument. The heating mechanism becomes efficient than before. Take your truck to a professional person when you cannot identify the problem. 

What is the average cost of replacing a seat-heater in the Ford F-150?

It is expensive to replace a seat heating system in a truck. These devices are costly on your budget. You should take care of your seat heating device if you travel to cold areas regularly.

The average cost of replacing a seat heater in a Ford F-150 is from $240 – $ 260. It is a once-in-a-lifetime investment with all the essential benefits. 

Related Articles:

What causes the rear window defroster in Ford F-150 to stop working?

How to replace the oil pan gasket in Ford F-150?

How to repair power door locks in Ford F150?

How to fix the speedometer in Ford F150?

How to clean cloth seats on Ford F150?

How do you remove Ford F150 Back Seat?