Skip to Content

Ford F150 Oil Drain Plug Problems

Ford F150 Oil Drain Plug Problems

An oil drain plug is the smallest part of the Ford F150, but it can cause the biggest hassle if it is not working correctly.

Ford F150 Oil Drain Plug Problems include deformed or missing crush washers present on the drain plug. In addition, the oil drain plug does not work due to the dust collection, damaged gasket, and stripping of the plug. When the oil plug is loose, it falls out, leading to oil leakage.

This plug is composed of plastic and it is present in the lowest position of the oil pan. 

 The reason for this location of the oil plug is to make the flow of oil in all systems of vehicles independent. 

Any problem in the F150 oil drain plug leads to leakage, and sometimes irreversible damage happens to the engine.

Loose Oil drain plug

This plug becomes loose and leads to an oil leak when it is not perfectly tight so ensure the perfect tightening of the plug.

Sometimes you may not observe leakage or any signal that can indicate any problem in your pickup due to less loose plug until it becomes flexible enough to fall out.

In other cases, the drain plug becomes loose, and it ultimately falls out from the vehicle, destroying the truck’s engine.

Falling out of plug and oil drainage arises after driving the F150 thousands of miles.

You can avoid this problem if you take your pickup to a good mechanic instead of tightening it with your own hands.

Stripping of the plug during oil drainage

The oil drain plug can ruin if you over tighten or cross-thread it and both of these things lead to deformation of shape and arrangement of threads on the bolt and pan.

The plug gets cross-threading when the Ford F150 drain plug is not in the right position to start, and finally, it strains during the remaining path and leads to the oil leak.

Its over-tightening also causes oil leakage, which happens when you utilize a power device on the pickup. This is because this power device generates fastening of the plug by exerting excessive force. 

You can avoid cross-threading the bolt and over-tightening the plug by cleaning the threads and the device.

After this, you should look over the signals of wear and tear that you don’t want to be in the vehicle’s system.

When the damage signals are present in the system, you can change the crush washer or the gasket because this thing will stop the bolt from cross-threading.

Finally, screw up the plug by using your hand to the possible extent, and if you feel opposition at the start of the procedure, do not force it because it can screw the threads.

If you want to avoid cross-threading of the plug, ensure its accurate positioning and then go on.

You can use force by utilizing the correct devices because your primary purpose is to avoid these problems by over-tightening the plug.

Avoid neglecting the stripping of your drain plug because it can cause internal harm to Ford F150, which will take more time and money to repair.

Damaged gasket 

The gasket on the drain plug protects the oil from leakage, and a gasket is present on the front of the oil plug to enclose it. 

The gasket holds the leakage of oil from the engine. Therefore, the leaky gasket on the drain plug will lead to these issues.

It will lead to problems in the engine, and contaminants will penetrate from the lower side of the engine’s oil pan.

The gasket is composed of rubber, and it is age paired and remains constantly exposed to heat.

The constant exposure to heat causes the breakdown of the gasket, and then the leakage starts, so you will observe oil marks in places where you park your vehicle.

The black smoke starts to come from below the hood, which is the most common sign of failure of the oil pan gasket.

The oil falls onto the exhaust manifold, resulting in the production of black smoke. You can solve this problem by changing the oil pan gasket and the drain plug.

Collection of dust and dirt

The chemical changes occur in the oil due to contaminants such as dust and dirt in the vehicle’s engine from driving the truck on a bumpy road. 

The limitations in the design of oil-fill caps, air cleaners, and ventilation systems of crankcase permit collecting a specific amount of dust into its drain plug.

When dust accumulates in the plug, the oil pressure decreases, and the engine’s lubrication system cannot work adequately.  

Therefore, it is necessary to use an oil filter to protect you from facing damage to vital parts of the vehicle. 

Similarly, when you try the correct engine maintenance by pressurized air or adding a funnel, a minimum amount of dust enters the plug, resulting in the engine’s life extension. 

The trouble occurs in burning the spark plug to give energy to the vehicle when the engine malfunctions due to the collection of dirt.

You can replace the drain plug in your F150 in case of excessive dust in the plug because otherwise, it can damage the engine permanently.

Deformed or missing Crush Washer

The crush washer is present on the oil drain plug, and it mainly performs the function of sealing the drain plug so that oil cannot leak from it.

When crush water is in suitable condition, then the problem of oil leakage does not occur in your pickup, and you enjoy a panic-free riding experience.

If the drain plug is not sealed adequately due to a deformed crush washer, your vehicle starts leaking oil which is a severe problem.

When the crush washer is not present on your truck, it also leads to the problem of oil leakage in the pickup.

The problem of an oil leak from your Ford F150 is serious, but you can quickly fix this problem by taking your vehicle to a mechanic.

Related Articles:

Is it a good idea to make under-seat storage for F150?

Tips to buy F150 with over 200k miles

F150 electric steering not working

Ford F150 Flywheel problems

Ford F150 hood latch faults

What are the Slots in your Ford Truck Bed for?