Skip to Content

Where is the Thermostat on a Ford F150?

Where is the Thermostat on a Ford F150?

A faulty thermostat can cause overheating in your Ford F150 engine. You should have the necessary information regarding its location for its proper maintenance.

Where is the Thermostat on a Ford F150? You can find a thermostat in Ford F150 between the radiator and engine. It is located next to the radiator hose, and the thermostat is covered with 3 bolts, 2 at the top and 1 present below, which is approximately 7mm to 9mm. Its location information is necessary for its maintenance.

Temperature regulation is one of these operational parameters. The engine will cause problems in vehicle functioning if it is overheated. 

Similarly, it will stop work if it becomes cold than the required temperature. The manufacturer put a thermostat between the engine and your vehicle’s radiator to adjust the engine’s temperature.

It is a mechanically operated valve located between the engine of your Ford F150 and its radiator. As it is a mechanically operated valve, it never takes any electrical energy from the battery of your Ford truck.

Its common purpose is to keep the engine warmer as per the engine requirement.

The thermostat in a Ford F150

When your vehicle’s engine is operating at the proper temperature, it works by stopping the coolant flow from the radiator to the engine.

Similarly, it allows coolant to flow from the radiator to the engine when the engine temperature is higher than the required level during vehicle operation.

Sometimes, the engine of your F150 does not start because it is cold or hot. 

Some common issues faced by the thermostat are its wear and tear due to excessive operation and rust inside the device due to the flow of coolant liquid from its opening valve. 

Why do we need to Find a Thermostat in a Ford F150?

As discussed above, the thermostat plays a vital role in proper engine operation.

The vehicle operator must have a thorough understanding of the thermostat’s functioning, location, and how to have it repaired or replaced in the case of a malfunction. 

You can thoroughly understand its process of operation and the possibilities of any problem faced by the engine due to an issue in this part.

In case of any problem, you can remove this device, examine it and replace it with a new one. 

Consumers prefer a new thermostat over an old one due to its low cost. It is necessary for preventative maintenance or a coolant system flush.

No vehicle manufacturer would use this component if it were not part of the cooling system.

Although in such a situation, your truck appears to be in good physical shape, that doesn’t mean it’s running at optimal temperatures without a thermostat.

Always remember that if a component fails to work well, it should be replaced rather than repaired.

What does Thermostat look Like in Ford F150?

It is a coolant flow regulator that controls by the coolant temperature.

Its cylindrical body is made of copper metal. 

Inside of it has a stem that also has the same material. 

The filler inside the thermostat melts at 170 degrees Fahrenheit, which can control by a rubber compressor and enters the coolant, and pulls the stem.

It has one or two valves, one at the bottom and the other at the top. Its small and large outline can open and close by valve. 

Its structure includes a spring that prevents rod movement.

When the coolant temperature is high to a specified level, the valve opens to enable the coolant circulation toward the radiator and send it back to the engine.

The temperature of the coolant can vary, which does not mean the device is not working correctly. Instead, it depends on various factors, like ambient temperature. 

The new and old thermostat has some changes in its adjustment like the former has no grooves and adjusts loosely, while later fits tightly and has ridges. Putting the gasket in the proper location after tightening the bolts might help secure it.

Read Ford F150 Manual to locate its Thermostat

The vehicle manual is the best guide for any vehicle owner. It offers you valuable information about the vehicle’s specifications on the one hand and a concise sketch of the vehicle’s principal components and their operation on the other.

You have a detailed diagram of the vehicle engine, interior, and its vital parts with proper and complete labeling of images, so locate a mechanically driven thermostat within your vehicle by the user manual.

Furthermore, complete detail is also given inside this manual to develop a clear understanding of your Ford F150. As a result, consult the manual for its location within your truck.

How to Locate the Thermostat in Ford F150?

It is always easy to find the thermostat location in your Ford F150. 

The place of this component depends on the engine position longitudinally or transversely. 

A thermostat is located horizontally on the front side of the gasoline engine(7.5L) of the 1993 F150 model, while this model 5.0 and 5.8L engine thermostat has a vertical position.

After conducting some research, I find that its location is identical almost in all Ford models.

When you decide to find it, make sure your pickup truck is cool because anti-freeze can cause skin irritation or burn. 

Mostly, you can easily see it from the engine side directly. 

 Wait until your vehicle engine is cold, remove the hood cover, take out the intake and cover the filter with three clamps. 

Next, disconnect the cable from the sensor.  The thermostat is present where the radiator hose connects to the engine.

You should follow your radiator hoses to find the thermostat directly after the radiator from which it enters into the engine. 

It encloses within the housing, which secures by three bolts: two on the top and one on the bottom.

The fasteners that secure the assembly are roughly 7mm to 9mm in diameter. Because there is a lot of pressure, you should unscrew it slowly to avoid any issue or mess.

When you look down on the passenger side of the F150, there is a small hole at the bottom with a yellowish-color plastic screw that is the radiator drain.

The coolant system’s primary component is the water pump, which is present below the radiator.

You must take precautions and avoid working with the engine turned on because your fingers can burn.

Related Articles:

Ford F150 Hydraulic Clutch problems

F150 Electronic Locking Differential Problems

Uses of slots in F150 truck bed

Ford F150 Hood Latch Problems

Ford F150 Body Control Module Problems

F150 Active Grill Shutter Problems