Skip to Content

How to Install Toyota Tacoma Center Caps?

How to Install Toyota Tacoma Center Caps?

Here are easy steps to add center caps to your Toyota Tacoma. In addition, you can use the center cap for decorative purposes as these are available in different materials and styles. 

How to Install Toyota Tacoma Center Caps? You can install a Toyota Tacoma center cap within a few minutes, first, measuring its size and removing the old center cap. Next, place the new one, and tighten the lug nuts. You can also fix it without the nuts and bolts and apply silicon at its back to prevent it from coming out.

Toyota Tacoma is more reliable and has excellent engine capacity that covers miles continuously. 

The company makes modifications in it according to the customer demand and need. For example, the addition of a center cap on the wheel increases its charm and functionality.

Easy steps to install Toyota Tacoma center cap

You should concentrate on the procedure while the mechanic is doing the task. It will help you in repair and replacement when you are away from the state.

Remove the existing center cap if present

You can install it in the space or replace it with a new and more reliable product. It is easy to install in the space when it lacks.

In addition, you can replace the existing one with another if you want. First, you should remove it, but it depends on the style and method of fixing.

Some caps do not require special tools, but you should remove the tires. Place the jack stand in the bottom of the truck near the wheel and start rotating the handle in the anti-clockwise direction.

The wheel will be up, and you can open the nuts and bolts with screwdrivers and pliers. Lay the wheel on the floor and try to pull the cup with fingers.

You can also turn the side and hit with the small rubber hammer and use the screwdriver, and hit the cap from the other side.

It will separate it from the rims, do this with all the other wheels one by one. You can also remove the center cap without separating the wheel from the body.

Take a lug wrench and place it on the lug nuts and rotate in an anti-clockwise direction. Do this with all the nuts and pull these nuts out. It is better to place the center cap with nuts because it will not fall during travel.

Remove the tension ring and clean its surface

You will remove the tension ring from the inner side of the cup on the wheel. It is better to remove it with pliers that have sharp and needle tips.

The professional fixes it in the hollow space and apply oil on the surface to make it resistant-free. You should change it when you are replacing the center cap of the truck wheels.

It creates the bond between the cap on the axle and allows it to move with speed changes. In addition, it holds the nearby parts in alignment and works efficiently.

Before installation, you should clean the area whether you remove the existing cap or add the new one. Take a microfiber cloth and remove the dry dust by rubbing it all over the surface.

You can use the same fabric after washing or waste it and take another. Dip the clean sponge or piece of cloth in the cleaning solution or spray the cleaner.

Immediately remove the moisture and dry to protect it from rust. It is better to use market-based products and oils to clean the parts of vehicles.

Add a new center cap

Take a new center cap accord the size and your choice. You can buy a simple, fancy, and stylish hub, unpack it and place it in the center of the rims.

The plastic, steel, iron, and aluminum hub are available in the market. Some have edges at the back that will fit on the rims.

Some have flower shapes and have holes for nuts. It will fix after the removal of lug nuts and reinstallation from the cap to the rims.

Take out the tension ring from the new and fix it in between the wheels. Furthermore, take the center cap and fix it between the rims until you hear the click sound.

Place the tire again on the axle if you removed it for the installation of the hub. 

Fix the wheel at its position and lower the jack by rotating it in the opposite direction. It will take the truck to the ground level.

Repeat this procedure three more times and do the entire task patiently. Finally, you should choose the material and color according to the model of the Toyota Tacoma.

Why would you add centers caps on your Toyota Tacoma?

You will be able to find the reasons by reading the following survey. Recently the volunteers at our company conducted it, collected data, and made the results.

There are a few reasons for installing it on the rims of the wheel. First, a survey was conducted to collect information regarding its use. 

There were 100 random American participants in this activity, and all have their own Toyota Tacoma. 

The workers divided the questionnaire among the participants. All filled it and submitted the questionnaire after 10 minutes.

20 out of 100 participants added the center cap for decorative purposes. It gives strength to the wheels and increases its charm if you add a stylish hub.

30 participants respond that it covers the spindle nuts and wheel barring from dust and rust. The dust and moisture go into the barring and nuts and become sticky.

It will interrupt during riding and cause the wheels to stand in one position. Therefore, it is better to cover the rim with it and protect it from environmental changes.

If the wheel gets corrosion due to the direct contact with moisture in the air, it automatically affects the axle. As a result, it will not move and produce sound while driving.

25 participants thought that it adds value to the truck and increases the price. The buyer will happily pay the demanded money When the vehicle looks clean and stylish.

10 participants mentioned that they installed it without getting any benefit. It was just their taste to add these in the wheels.

10 participants wanted to increase the performance and reliability of the rims and fix the center cap on the rims.

Few people drive the Toyota Tacoma without installing the hub on the wheels. However, there were 5 participants who did not like to fill the space with it.

Moreover, it has many benefits, as described in the survey. For example, people like to add stylish and fancy caps, while some like classical and straightforward to give a vintage look to the vehicle.

How do you remove the center cap on a Toyota Tacoma?

Hold the cap from the edges and pull it with fingers. You can also use the needle tip pliers and take them beneath the cap plate.

You can also remove it using a screwdriver, pliers, and lug wrench. Unscrew the lug nuts and remove them and again place the nuts and tighten them.

Unscrew the tire from the truck and place it on the floor. There is another way to remove it from the rims. Take a rubber hammer or handle of a screwdriver from the back and slightly hit on the hub.

Is it legal to drive Toyota Tacoma without a center cap?

You can drive your truck without any fear and hesitation. It depends on the riders or owner to choose the hub.

It is not necessary to install it in every vehicle. In addition, it is better to fix it while you are going on a long journey.

You can decorate the exterior with different ornaments, and it is one of them. You can select any style and color, but there is a restriction to installing spike wheel ornaments.

You cannot add long spike wheels, spike rims, and spike center caps to the Toyota Tacoma. There is regulation as these can cause harm to humans.

How to prevent the center cap from coming out of the wheel?

You can prevent it from coming out of the wheel using silicon. The silicon is available in the market in hardware shops at affordable prices.

The silicon will provide a firm grip and hold the cap for a longer time. However, sometimes it loses and falls during driving either you connected it with nuts.

It is necessary to check the nuts and bolts of the truck before going on the journey. You can do it yourself or take the vehicle to the workshop.

The lug nuts lose when you drive on the uneven path having ricks and stones. It will also loosen the grip of rims and cap, and it will fall off.

It is better to use transparent sticky material at the back. You can also choose that hub with a plastic or metallic support that will fit between the spaces of rims.

Related Articles:

How many miles can a Toyota Tacoma go with the empty gas tank?

What’s the gross weight of the Toyota Tacoma?

Is it easy to find the starter on the Toyota Tacoma?

Is it easy to remove the broken antenna and add new on the Toyota Tundra?

How to Add Spyder Headlights on Toyota Tacoma?

Can You Install 3 Inch Lift Kit on Toyota Tacoma?

How to Change Toyota Tacoma Startup Screen?